SMP253 • EMI suppressor, class Y2, metallized paper SMD • 0.001 – 0.0047 µF, 250 VAC, +100 °C H TYPICAL APPLICATIONS The capacitors are intended for use as interference suppressors in Y2 applications, line-to-earth. B 0.5 CONSTRUCTION Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. L 0.5 TECHNICAL DATA Rated voltage 250 VAC 50/60 Hz Capacitance range 0.001 – 0.0047 µF Capacitance tolerance ± 20% Temperature range –40 to +100°C Climatic category IEC 40/100/56/B Approvals S, UL, CSA δ Dissipation factor tanδ ≤ 1.3 % at 1 kHz Insulation resistance ≥ 12000 MΩ Measured at 500 VDC after 60 s, +23°C Test voltage between terminals The 100% screening factory test is carried out at 3000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. Components may be vertically mounted for decreased footprint. See page 69. RECOMMENDED SOLDERING CONDITIONS Electrode temperature, Reflow soldering Preheating temperature should be less than 160°C. The time above 180°C should be less than 1 minute. The peak temperature must not exceed 240°C. Temperature (°C) 250 Max 240 °C 200 Max 160 °C 150 Max 60 s over 180 °C 100 50 0 0 30 60 90 120 150 180 210 240 270 300 t(s) Recommended reflow soldering profile ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6 Test Fc Active flammability EN 132400 Passive flammability IEC 60384-14 (1993) EN 132400 Humidity IEC 60068-2-3 Test Ca 180 3 directions at 2 hour each 10 – 500 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Class B +40°C and 90 – 95% R.H. 56 days SMP253 ARTICLE TABLE Max dU/dt V/µs Approvals CSA Quantity per package Bulk Reel UL µF Dimensions in mm ±0.2 mm B H L S Capacitance √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ Article code CHIP LENGTH 12.7 MM CODE 5045 0.0010 0.0015 0.0022 0.0025 0.0033 0.0039 0.0047 11.5 11.5 11.5 11.5 11.5 11.5 11.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 1000 1000 1000 1000 1000 1000 1000 600 600 600 600 600 600 600 2000 2000 2000 2000 2000 2000 2000 Specification Approval reference S EN 132400 9949069/01 UL UL 1414 E73869 cUL recognition (CSA) C 22.2 No. 1 E73869 MA4100M MA4150M MA4220M MA4250M MA4330M MA4390M MA4470M MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body SMP253 SMP253 SMP253 SMP253 SMP253 SMP253 SMP253 • • • • • • RIFA Article code SMP Rated capacitance Rated voltage Y2 Manufacturing code (year, month) ORDERING INFORMATION See article table and pages 18 to 23 for options and article code construction. Tape packaging, see page 69. 181