ETC PME271M660KR30

PME271M/E
• EMI suppressor, classes X1 and X2, metallized paper
• 0.001 – 0.6 µF, 275/300 VAC, +110 °C
L
Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing material
meeting the requirements of UL 94V-0.
TECHNICAL DATA
PME271M
PME271E
Rated voltage VAC, 50/60Hz
275
300
Capacitance range µF
0.001–0.6
0.01–0.22
Temperature range °C
–40/+110
–40/+110
Climatic category IEC
40/110/56/B
40/110/56/B
Capacitance tolerance
± 10% for C > 0.1 µF, code K. ± 20% for C ≤ 0.1 µF, code M
Approvals
S, N, D, FI, VDE, SEV, IMQ, UL, CSA
p ± 0.5
∅d
d = 0.6 for p = 10.2
0.8 for p = 15.2, 20.3, 22.5
1.0 for p = 25.4
l = standard 30 +5/-0 mm (code R30)
option
short leads, tolerance +0/-1 mm
(standard 6 mm, code R06)
Other lead lengths on request.
dB
Attenuation
70
0.47 µF
60
δ
Dissipation factor tanδ
Insulation resistance
In DC applications
B
CONSTRUCTION
H
TYPICAL APPLICATIONS
The capacitors are intended for use as
interference suppressors in X1 or X2
(across-the-line) applications.
• The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
• Good resistance to ionisation due to
impregnated dielectric.
• High dU/dt capability.
• Small dimensions.
• Safety approvals for worldwide use.
• The capacitors meet the most stringent
IEC humidity class, 56 days.
l
• The highest possible safety regarding
active and passive flammability.
• Self-extinguishing UL 94V-0 encapsulation
material.
• Excellent self-healing properties. Ensures
long life even when subjected to
frequent overvoltages.
≤ 1.3 % at 1 kHz
0.047 µF
50
0.0047 µF
40
C ≤ 0.33 µF ≥ 12000 MΩ
C > 0.33 µF ≥ 4000 s
Measured at 500 VDC after 60 s, +23°C
30
20
10
Recommended voltage: ≤ 630 VDC
f
0
Resonance frequency
Tabulated self-resonance frequencies f0 refer to 5 mm
lead lengths.
Test voltage between
terminals
The 100% screening factory test is carried out at 2150 VDC.
The voltage level is selected to meet the requirements in
applicable equipment standards. All electrical characteristics
are checked after the test.
1
3
5
10
30
100
200 MHz
Suppression versus frequency. Typical values.
ENVIRONMENTAL TEST DATA
Vibration
IEC 60068-2-6, Test Fc
3 directions at 2 hour each,
10 – 500 Hz at 0.75 mm or 98 m/s2
No visible damage, No open or short circuit
Bump
IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2
No visible damage, No open or short circuit
Solderability
IEC 60068-2-20, Test Ta Solder globule method
Wetting time
Active flammability
EN 132400
Passive flammability IEC 60384-14 (1993), EN 132400
Humidity
162
IEC 60068-2-3, Test Ca
+40°C and 90 – 95% R.H.
56 days
for d ≤ 0.8 < 1 s
for d > 0.8 < 1.5 s
PME271M/E
ARTICLE TABLE
p
Quantity per package
reel
R30
R06 taped Weight
pcs
pcs pcs
g
Approvals
fO
MHz
Max
dU/dt
V/µs
S
N
D
FI
VDE
SEV
IMQ
UL
CSA
Capaci- Max dimensions
tance
in mm
µF
B
H
L
Article code
CLASS X2 275 VAC +110 °C PME271 M
0.0010
0.0015
0.0022
0.0033
0.0047
3.9
3.9
3.9
4.1
5.1
7.5
7.5
7.5
8.2
10.5
13.5
13.5
13.5
13.5
13.5
10.2
10.2
10.2
10.2
10.2
1000
1000
1000
1000
800
2000
2000
2000
2000
1600
700
700
700
600
600
0.7
0.7
0.7
0.9
1.2
53
44
37
30
24
1200
1200
1200
1200
1200
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
5.2
5.2
5.2
6.0
6.0
6.0
7.8
8.5
10.5
10.5
10.5
12.5
12.5
12.5
13.5
14.3
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
500
500
500
400
400
400
400
300
1000
1000
1000
800
800
800
800
500
600
600
600
400
400
400
400
350
1.7
1.7
1.7
3.0
3.0
3.0
3.3
3.8
19
16
13
10
8.4
7.0
5.6
4.3
1200
1200
1200
1200
1200
1200
1200
1200
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
0.10
0.15
0.22
7.6
9.0
11.3
14.0
15.0
16.5
24.0 20.3
24.0 20.3
24.0 20.3
250
200
150
1500
1200
1000
250
250
180
4.0
5.0
7.0
4.1
3.4
2.7
600
600
600
√ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √
PME271M610MR30
PME271M615KR30
PME271M622KR30
0.10
0.15
0.22
0.27
0.33
8.0
8.0
10.0
12.0
12.0
17.0
17.0
19.0
22.0
22.0
27.0
27.0
27.0
27.0
27.0
22.5
22.5
22.5
22.5
22.5
200
200
150
100
100
1200
1200
1000
800
800
250
250
200
5.5
5.5
7.5
10.0
10.0
3.9
3.3
2.6
2.3
2.1
600
600
600
400
400
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PME271MD6100MR30
PME271MD6150KR30
PME271MD6220KR30
PME271MD6270KR30
PME271MD6330KR30
0.27
0.33
0.47
0.60
10.5
12.1
15.3
15.3
17.3
19.0
22.0
22.0
30.5
30.5
30.5
30.5
25.4
25.4
25.4
25.4
100
100
75
75
1000
800
600
600
8.5
10.0
15.0
15.0
2.4
2.1
1.8
1.6
400
400
400
400
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PME271M627KR30
PME271M633KR30
PME271M647KR30
PME271M660KR30
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PME271E510MR30
PME271E515MR30
PME271E522MR30
PME271E533MR30
PME271E547MR30
PME271M410MR30
PME271M415MR30
PME271M422MR30
PME271M433MR30
PME271M447MR30
√
√
√
√
√
√
√
PME271M468MR30
PME271M510MR30
PME271M515MR30
PME271M522MR30
PME271M533MR30
PME271M547MR30
PME271M568MR30
PME271MB6100MR30
CLASS X1 300 VAC +110 °C PME271 E
√
√
√
√
√
√
√
√
√
√
0.010
0.015
0.022
0.033
0.047
5.2
5.2
7.3
7.3
8.5
10.5
10.5
13.0
13.0
14.3
18.5
18.5
19.0
19.0
18.5
15.2
15.2
15.2
15.2
15.2
500
500
400
400
300
1000
1000
800
800
500
600
600
400
400
350
1.7
1.7
3.0
3.0
3.8
16
13
9.8
7.0
6.4
1200
1200
1200
1200
1200
0.068
0.10
7.6
11.3
14.0
16.5
24.0 20.3
24.0 20.3
250
150
1500
1000
250
180
4.5
7.0
5.2
4.1
600
600
√ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √
PME271E568MR30
PME271E610MR30
0.068
0.10
0.15
0.22
8.0
8.0
10.0
12.0
17.0
17.0
19.0
22.0
27.0
27.0
27.0
27.0
22.5
22.5
22.5
22.5
200
200
150
100
1200
1200
1000
800
250
250
200
5.5
5.5
5.5
5.5
4.7
4.1
3.2
2.5
600
600
600
600
√
√
√
√
PME271ED5680MR30
PME271ED6100MR30
PME271ED6150KR30
PME271ED6220KR30
0.15
0.22
10.6
12.1
16.1
19.0
30.5 25.4
30.5 25.4
150
100
1000
800
8.6
10.0
3.3
2.6
400
400
√ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PME271E615KR30
PME271E622KR30
163
PME271M/E
MARKING
APPROVALS/REFERENCE DOCUMENTS
Certification Body
Specification
Approval reference
S
EN 132400
9834227-01 (X2), 9821105-01 (X1),
N
EN 132400
P98102279 (X2), P98101874 (X1)
D
EN 132400
308048 (X2), 307886 (X1),
FI
EN 132400
203301 (X2), 202782 (X1),
VDE
EN 132400
118230 (X2), 117365 (X1),
SEV
EN 132400
99.7 70053.01 (X2),
99.7 70083.01(X1)
IMQ
EN 132400
V 4699 (X2), V 4698 (X1),
UL
UL 1283 (UR = 250 VAC)
UL 1414 (UR = 250 VAC)
E 100117 (X2, X1)
E 73869 (X2)
CSA
C 22.2 No. 1
(UR = 250 VAC)
53108 (X2)
ORDERING INFORMATION
The article code for the standard part is given in the article table.
For other options, see page 21.
164
•
•
•
•
•
•
•
RIFA
RIFA article code
Rated capacitance
Rated voltage
X2 or X1
SH, for self-healing
Climatic category according to
IEC 60068-1, appendix A
• Passive flammability class
• Approval marks
• Manufacturing code (year, month)
PACKING
Capacitors in standard design (lead length
30 mm) and with L < 24 mm and lead length
5 or 6 mm are packed bulk in a box with
dimensions 245 x 145 x 80 mm. Quantity/
package as per article table.
Capacitors with L ≥ 24 mm and lead length 5
or 6 mm are packed on trays piled in a box
with dimensions 300 x 260 x 195 mm.
Quantity/package as per article table.
Reels with taped capacitors are packed 10
in a box with dimension 370 x 370 x 560
mm. The standard quantity/reel is for 360
mm reel. If 500 mm reel is required, it must
be specified when ordering and the
quantity is 2 x the given quantity.