SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Approval Specification TO: Part No: SP959.0B01-TD01 Customer’s Part Customer’s Approval Certificate Please return this copy as a certification of Your approval Checked & Approval Date P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Approved by: Checked by: Issued by: SPECIFICATION MODEL SP959 SURFACE ACOUSTIC WAVE FILTER P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 1. Package Dimension (F-11 ) Unit: mm Pin No. Functions 1. Input 2. Ground 3. Ground 4. Output 2. Marking D 959 (1) Color: Black or Blue (2) D: SIPAT Manufacture’s logo D3 (3) 959: Center Frequency (MHz) (4) D3: Date code D Month code 3 Last figure of year Month 1 2 3 4 5 6 7 8 9 10 11 12 Month code A B C D E F G H I e.g.: J K L “ D3 ” means April of 2003 P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 3. Performance 3.1 Application Low-Loss SAW Filter of Cordless Phone System. Center Frequency: 959.0 MHz. 3.2 Maximum Rating Operation Temperature -10℃ to +60℃ Storage Temperature Range -25℃ to +70℃ DC Permissive Voltage 10V DC max. Maximum Input Power 0 dBm 3.3 Electronic Characteristics Item Frequency (MHz) Center Frequency ( fo ) 959.0 Passband Width fo±1.0 Specification Insertion Loss Passband 3.5 dB max. Ripple Deviation Passband 1.5 dB max. Stop Band Suppression fo-46 ~ fo-41 fo-23～fo-20 fo+20 ~ fo+23 Terminating Impedance 40 30 20 40 dB dB dB dB min. min. min. min. 50 + j60.3Ω P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 3.4 Frequency Characteristics 3.5 Test Circuit P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 4. Reliability 4.1 Mechanical Shock: The components shall remain within the electrical specifications after 1000 shocks, acceleration 392m/s2, duration 6 milliseconds.. 4.2 Vibration Fatigue: The components shall remain within the electrical specifications after loaded vibration at 10～120 Hz, amplitude 1.5 mm, X,Y,Z, direction, for 2 hours. 4.3 Terminal Strength: The components shall remain within the electrical specifications after pulled 2 kgs weight for 10 seconds towards an axis of each terminal. 4.4 High Temperature Storage: The components shall remain within the electrical specifications after being kept at the 85℃±2℃for 960 hours, then kept at room temperature for 2 hours. 4.5 Low Temperature Storage: The components shall remain within the electrical specifications after being kept at the -25℃±2℃ for 960 hours, then kept at room temperature for 2 hours. 4.6 Temperature Cycle: The components shall remain within the electrical specifications after 5 cycles of high and low temperature testing ( one cycle: 80℃ for 30 minutes→ 25℃ for 5 minutes→-25℃for 30 minutes )than kept at room temperature for 2 hours. 4.7 Humidity Test: The components shall remain within the electrical specifications after being kept at the condition of ambient temperature 40±2℃, and 90～ 95% RH for 960±5 hours, then kept at room temperature and normal humidity for 1.5 hours. 4.8 Solder-heat Resistance: The components shall remain within the electrical specifications after dipped in the solder at 350℃±5℃for 5±1 seconds, then kept at room temperature for 10 mins. (Terminal must be dipped leaving 1.5 mm from the case). 4.9 Solderability: Solderability of terminal shall be kept at more than 80% after dipped in the solder flux at 230℃±5℃ for 5±1 seconds. 4.10 Storage: The components shall meet the electrical and mechanical specifications after 5 years storage, if stored within the temperature range of -20℃～ +60℃and in the humidity of 20 to 60% r.h. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 5. Remarks 5.1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the component. Please avoid static voltage. 5.2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning. 5.3 Soldering Only leads of component may be soldered. Please avoid soldering another part of component. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]