DH Type High Insulation DIP Relay n Features • Molded Epoxy Body • DIP type construction with the same terminal pitch as IC's or TTL's simplifies designing. • High sensitivity allows for direct driving by TTL's, etc. • High Breakdown: 4KV between coil and contact • Sealed construction for automatic flow soldering and cleaning n n Characteristics Contact resistance Operate Time Bounce Time Release Time Insulation Resistance Power Switching Voltage Switching Current Carrying Current Life Expectancy Minimum Breakdown Voltage Operate Temperature Storage Temperature Minimum Permissible Load Vibration Shock Resonant Frequency 100mOhm max., initial 0.5msec max. 0.5msec max. 0.2msec max. 10 1 1 ohm min. 10VA max. 200VDC max. 0.5 Amps max. 1.0 Amps max. 8 10 (signal level) 250VDC across open contact 4000VAC between coil and contact -45 - +85 C -50 - +125 C 100mVDC 10 mA 20g (10-2000Hz) 30g (11ms 1/2 sine wave) 3.5KHz Dimensions n PCB Layout n Specifications (Contact Form: 1 Form A) Nominal Coil Voltage Part Number DH1A05000 DH1A12000 DH1A24000 DH1A050D0 DH1A120D0 DH1A240D0 5 12 24 5 12 24 Coil Must Resistance Operate +/10% (VDC) 500 1000 2150 500 1000 2150 3.75 9.0 18.0 3.75 9.0 18.0 Must Rated Continuous Release Current Voltage (VDC) (mA) (max.) 1.0 1.2 2.4 1.0 1.2 2.4 10 12 11.1 10 20 28 10 12 11.1 10 20 28 Circuit Schematic Top View 65 SHARK RIVER ROAD, NEPTUNE, NEW JERSEY 07753-7423 TOLL FREE 1 (888) 922-8330 FX (732) 922-6363 E-mail: [email protected]