SRC1205M NPN Silicon Transistor PIN Connection Descriptions • Switching application 2. OUT • Interface circuit and driver circuit application Features 3. IN • With built-in bias resistors • Simplify circuit design • Reduce a quantity of parts and manufacturing process • High packing density R1 123 R2 R1 R2 2.2KΩ 47KΩ 1. COMMON Ordering Information Type NO. Marking Package Code 1205 TO-92M SRC1205M Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Output voltage VO 50 V Input voltage VI 15,-5 V Output current IO 100 mA Power dissipation PD 400 mW Junction temperature TJ 150 °C Tstg -55 ~ 150 °C Storage temperature range Electrical Characteristics Characteristic Output cut-off current (Ta=25°C) Symbol IO(OFF) Test Condition VO=50V, VI=0 Unit - - 500 nA 80 200 - - DC current gain GI Output voltage VO(ON) IO=10mA, II=0.5mA - 0.1 0.3 V Input voltage (ON) VI(ON) VO=0.2V, IO=5mA - - 1.1 V Input voltage (OFF) VI(OFF) VO=5V, IO=0.1mA 0.5 - - V VO=10V, IO=5mA, f=1MHz - 200 - MHz VI=5V, IO=0 - - 3.6 mA * VO=5V, IO=10mA Min. Typ. Max. Transition frequency fT Input current II Input resistor (Input to base) R1 - 1.54 2.2 2.86 KΩ Input resistor (Base to common) R2 - 33 47 61 KΩ * : Characteristic of transistor only KSD-R0B005-000 1 SRC1205M Electrical Characteristic Curves Fig. 1 PD - Ta Fig. 2 IO - VI(ON) Fig. 4 GI - IO ㎂ Fig. 3 IO - VI(OFF) KSD-R0B005-000 2 SRC1205M Outline Dimension KSD-R0B005-000 3 SRC1205M The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-R0B005-000 4