SRA2202N Semiconductor PNP Silicon Transistor Descriptions • Switching application • Interface circuit and driver circuit application Features • • • • With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Complementary pair with SRC1202N Ordering Information Type NO. Marking SRA2202N SRA2202 Package Code TO-92N Outline Dimensions unit : mm 4.20~4.40 • Equivalent Circuit 4.20~4.40 2.25 Max. OUT IN R1 13.50~14.50 0.52 Max. 2.14 Typ. R2 0.90 Max. 1.27 Typ. 1 2 3 COMMON 0.40 Max. R1 R2 10KΩ 10KΩ 3.09~3.29 3.55 Typ PIN Connections 1. COMMON 2. OUT 3. IN KSD-R0C013-000 1 SRA2202N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Output voltage VO -50 V Input voltage VI -30, 10 V Output current IO -100 mA Power dissipation PD 400 mW Junction temperature TJ 150 °C Tstg -55 ∼ 150 °C Storage temperature range Electrical Characteristics Characteristic Output cut-off current (Ta=25°C) Symbol IO(OFF) Test Condition VO=-50V, VI=0 Unit - - -500 nA 50 80 - - DC current gain GI Output voltage VO(ON) IO=-10mA, II=-0.5mA - -0.1 -0.3 V Input voltage (ON) VI(ON) VO=-0.2V, IO=-5mA - -1.8 -2.4 V Input voltage (OFF) VI(OFF) VO=-5V, IO=-0.1mA -1.0 -1.2 - V VO=-10V, IO=-5mA, f=1MHz - 200 - MHz VI=-5V, IO=0 - - -0.88 mA * VO=-5V, IO=-10mA Min. Typ. Max. Transition frequency fT Input current II Input resistor (Input to base) R1 - 7 10 13 KΩ Input resistor (Base to common) R2 - 7 10 13 KΩ * : Characteristic of transistor only KSD-R0C013-000 2 SRA2202N Electrical Characteristic Curves Fig. 2 IO - VI(OFF) ㎂ Fig. 1 IO - VI(ON) Fig. 3 GI - IO The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-R0C013-000 3