DC-DC CONVERTER KDD25 SERIES 26.5 ~ 27.2W TRIPLE OUTPUT KDD25 – 12 T 01 WATTAGE 12 : 9~18V IN 24 : 18~36V IN 48 : 36~72V IN 01: +5V/±12V OUT 02: +5V/±15V OUT 03: +5V/+12V/-5V OUT T : TRIPLE OUTPUT MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (MIN.) CASE Triple Output Models KDD25 – 12T01 9~18 VDC 27.2 WATTS +5V/±12V +4000/±300 mA 76% C KDD25 – 12T02 9~18 VDC 26.5 WATTS +5V/±15V +3500/±300 mA 77% C KDD25 – 24T01 18~36 VDC 27.2 WATTS +5V/±12V +4000/±300 mA 77% C KDD25 – 24T02 18~36 VDC 26.5 WATTS +5V/±15V +3500/±300 mA 78% C KDD25 – 24T03 18~36 VDC 25.1 WATTS +5V/+12V/-15V +4000/+300/-300 mA 78% C KDD25 – 48T01 36~72 VDC 27.2 WATTS +5V/±12V +4000/±300 mA 78% C KDD25 – 48T02 36~72 VDC 26.5 WATTS +5V/±15V +3500/±300 mA 79% C KDD25 – 48T03 36~72 VDC 25.1 WATTS +5V/+12V/-15V +4000/+300/-300 mA 79% C FEATURES * 2:1 INPUT RANGE * ISOLATION INPUT AND OUTPUT 1.5KV DC * HIGH PERFORMANCE UP TO 79% * SHORT CIRCUIT PROTECTION * 2 YEARS WARRANTY CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com [email protected] DC-DC CONVERTER KDD25 SERIES 26.5 ~ 27.2W TRIPLE OUTPUT SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25℃ Unless Otherwise Noticed GENERAL SPECIFICATION * Switching frequency: ......................... * Isolation voltage: .............................. * Isolation resistance: .......................... * Operating ambient temperature: ......... * Storage temperature: ........................ * Max. Case temperature: ..................... * M.T.B.F.: .......................................... * Cooling: ........................................... * Transient recovery time: .................... * Temperature coefficient: .................... * Dimension: ...................................... >80KHz 1,500VDC >1G Ω(min.) -25 to +71℃ -40 to +85℃ 85℃ 389,000Hrs at @ GF40, according to MIL-HDBK-217F Free air convection 500µS, 25% load step change ±0.02% / ℃ 70 x 100 x mm INPUT SPECIFICATIONS * Input voltage range / frequency: ........ 9 ~ 18VDC for 12V 18 ~ 36VDC for 24V 36 ~ 72VDC for 48V * Input filter: ....................................... Pi type OUTPUT SPECIFICATIONS * Output voltage accuracy: ................... ±2% ±3% for -5V_out * Minimum load: .................................. ±20% * Line regulation: ................................ ±1% at Vo_nom * Load regulation: ............................... ±2% for +5V ±5% for ±12V & ±15V & +12V/±15V * Ripple & noise: ................................. 20MHZ BM, Vout x ±1% mV p-p 150mV p-p for -5Vout * Efficiency: ........................................ Up to 79%, see model list * Derating: ......................................... See table 1 * Case material: .................................. Metal CONTROL AND PROTECTION * Output short circuit: .......................... Continuous CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com [email protected] DC-DC CONVERTER KDD25 SERIES 26.5 ~ 27.2W TRIPLE OUTPUT MECHANISM & PIN CONFIGURATION mm [inch] PHYSICAL CHARACTERISTICS 70 x 100 x23mm 2.76 x 3.94 x 0.91inches CASE SIZE CASE MATERIAL Metal WEIGHT 270 g PIN ASSIGMENT PIN NO. 1 2 3 4 5 6 7 TRIPLE Vi+ Vi- +5V OUT com Vo+ com Vo- Derating: Power out [%] [TABLE 1] 100 NATURAL CONVECTION COOLING 0 -25 60 70 85 Ambient Temperture [℃] CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com [email protected]