60W Open Frame Dual Output NAD-601X series Feature: l l l l 90 to 264Vac universal input range. Meet(Approval) UL/CUL, TUV. EMI/RFI meet VDE & FCC limit B. Low cost & compact size. l l 60Watts in127×76.2×36.5mm Size. 2 Year Warranty. Specifications: typical at nominal line, full load at 25 ° C. Input Specifications: General Specifications: Input voltage: 90 to 264Vac Input Frequency: 47 Hz to 63Hz Efficiency: 70% typical at full load Hold-up time: 15ms @ 115Vac full load Input inrush current: 20A at 115Vac 40A at 230Vac EMI/RFI: VDE & FCC Class B limits Dielectric Withstand: Input/output: 3000Vac Input/Ground: 1500Vac Earth leakage: 0.2mA max @ 115Vac 0.4mA max @ 230Vac Output Voltage Accuracy : ± 5% max. ¬Safety Meet(Approval): UL/CUL UL60950 TUV EN60950 Switching frequency: 20kHz(reference) Line Regulation: ± 1% max. Weight: 350g Load Regulation: ± 3% max. (Full to half load) Transient Response: ± 1% max.dev. (Full to half load) 500uS recovery MTBF: 100,000hours(MIL-HDBK-217F) Output Specifications: Output Rating: See Selection table Environmental Specifications: Operating temperature: 0 to +50°C Temperature Coefficient: ± 0.04% / °C Storage temperature: -20 to +85°C Ripple & Noise: 2% P-P max Humidity: 5 to 95 % RH non-condensing Protections: a. Over voltage protection Vibration: 2.4G , 5 to 500Hz b. Over power protection Cooling: Free air convection c. Short circuit protection Note: 1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis. 2. Maximum output power is 60W. 3. At least 20% of load is required to obtain stable regulation. 4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap & a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope directly. 5. Peak current less than 60 Sec. & output voltage can’t be drown out of window at same time. ¬ Please refer the safety approval status on appendix 1, For latest safety approval status Please consult YCL or visit" www.ycl.com.tw" Date: Sep 19,2003 15 60W Open Frame Dual Output NAD-601X series Model Selection Table: Model No. Vo1 V/A +5V/8A Vo2 PEAK V/A PEAK 10A +12V/1.5A 2A Max. Power 60W NAD-6012 Note: 1. Other output voltage versions available. Please Consult factory for details. Dimensions: mm ± 0.5mm DC Output Pin Functions Pin 1 Vo2 Pin 2,3,4 Vo1 Pin 5,6,7,8 COM l DC output mating connector is Molex 09-65-2088, Ever 8673-08 or equivalent. l AC input mating connector is Molex 5096-03C, Ever 8673-05N2,4 or equivalent. Date: Sep 19,2003 16