Crystal oscillator PROGRAMMABLE HIGH-FREQUENCY CRYSTAL OSCILLATOR SG-8002JF series Wide frequency output by PLL technology. Quick delivery of samples and short lead mass production time. Excellent shock resistance and environmental capability. Output enable function (OE) and stand-by function (ST) can be used for low current consumption applications. 8002 PROM Writer available to purchase.(Type:PRW-8000A3-M01) Please contact EPSON or local sales representative. Actual size Specifications (characteristics) Symbol Item Temperature range PH/SH Specifications VDD-GND VDD TSTG TOPR Max. supply voltage Operating voltage Storage temperature Operating temperature PC/SC -0.5 V to +7.0 V 5.0 V±0.5 V -55 °C to +125 °C -20 °C to +70 °C (-40 °C to +85 °C) -40 °C to +85 °C Soldering condition TSOL Frequency stability Current consumption Output disable current Standby current ∆f/f0 B: ±50 x 10-6 C: ± 100 x 10-6 M: ±100 x 10-6 Iop IOE IST tw/ t High output voltage Low output voltage Output load condition (fan out) VOH VOL N CL VIH VIL TTL C-MOS Output enable/disable input voltage Output rise time Output fall time C-MOS level TTL level C-MOS level TTL level tTLH tTHL Oscillation start up time Aging Shock resistance Note: 3.0 V ±0.3 V: f0 ≤ 66.7 MHz(PC/SC) 3.3 ± 0.3 V Twice at under +260 °C within 10 s or under +230 °C within 3 min. Duty Remarks 1.0000 MHz to 125.0000 MHz f0 Output frequency range Power source voltage PT/ST 45 mA Max. 30 mA Max. Refer to page 4."Frequency range" B,C: -20 °C to +70 °C, M:-40 °C to 85 °C 28 mA Max. 16 mA Max. 50 µA Max. — 40 % to 60 % 40 % to 60 % — VDD -0.4 V Min. 0.4 V Max. 5 TTL Max. — 15 pF Max. 2.0 V Min. 0.7 x VDD Min. 0.8 V Max. 0.2 x VDD Max. — 4 ns Max. 4 ns Max. — — 4 ns Max. 4 ns Max. — No load condition, Max. frequency range OE=GND(PT,PH,PC) ST=GND(ST,SH,SC) C-MOS load: 1/2VDD level TTL load: 1.4 V level IOH=-16 mA(PT/ST,PH/SH),-8 mA(PC/SC) IOL= 16 mA(PT/ST,PH/SH), 8 mA(PC/SC) Max. frequency and Max. operating voltage range _ ST, OE terminal C-MOS load: 20 %→80 % VDD TTL load: 0.4 V→2.4 V C-MOS load: 80 %→20 % VDD TTL load: 2.4 V→0.4 V tOSC 10 ms Max. fa ±5 x 10-6/year Max. Ta= +25 °C, VDD = 5.0 V/3.3 V(PC/SC) ±20 x 10-6 Max. Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions S.R. Time at minimum operating voltage to be 0 s • Please contact us for inquiries about operating temperature(-40 °C to +85 °C), usable frequencies, duty and output load conditions. Checking possible by the Frequency Checking Program. http://www.epson.co.jp/CRYSTAL/ External dimensions (Unit: mm) 0 Min. 1.8 4.2 0.4 (0.75) (0.75) (Wired-or connection & Jitter specification, please refer to page 13.) (Unit: mm) 2.0 5.08 NO. Pin terminal 1 OE or ST 2 GND 3 OUT 4 VDD 5.3 Max. E 125.00C 2PH 9245A 4.6±0.2 7.1±0.2 Recommended soldering pattern 1.5 Max. • • • • 5.08