H11J1X, H11J2X, H11J3X, H11J4X, H11J5X H11J1, H11J2, H11J3, H11J4, H11J5 OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC APPROVALS l UL recognised, File No. E91231 'X' SPECIFICATION APPROVALS l VDE 0884 in 2 available lead forms : - STD - G form 7.0 6.0 FEATURE l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l 250V Peak Blocking Voltage l All electrical parameters 100% tested l Custom electrical selections available OPTION SM 0.6 0.1 10.46 9.86 7.62 5 3 4 7.62 6.62 7.62 4.0 3.0 13° Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25 °C unless otherwise noted) Storage Temperature -400C - +1500C Operating Temperature -400C - +1000C Lead Soldering Temperature 2600C (1.6mm from case for 10 seconds) Input-to-output Isolation Voltage (Pk) 7500 Vac (60 Hz , 1sec. duration) INPUT DIODE Off-State Output Terminal Voltage 250V RMS Forward Current 100mA Forward Current (Peak) 1A Power Dissipation 300mW (derate linearly 4.0mW/0C above 250C) POWER DISSIPATION 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 8/8/01 2 OUTPUT PHOTO TRIAC OPTION G 1.25 0.75 6 Forward Current 50mA Reverse Voltage 6V Power Dissipation 70mW (derate linearly 0.93mW/0C above 250C) APPLICATIONS l CRTs l Power Triac Driver l Motors l Consumer appliances l Printers SURFACE MOUNT 1 1.2 DESCRIPTION The H11J_ series are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac mounted in a standard 6 pin dual-in-line package. Dimensions in mm 2.54 Total Power Dissipation 330mW (derate linearly 4.4mW/0C above 250C) ISOCOM INC 1024 S. Greenville Ave, Suite 240, Allen, TX 75002 USA Tel: (214) 495-0755 Fax: (214) 495-0901 e-mail [email protected] http://www.isocom.com DB92166m-AAS/A3 ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted ) PARAMETER MIN TYP MAX UNITS Input Forward Voltage (VF) Reverse Current (IR) Output Peak Off-state Current ( IDRM ) Peak Blocking Voltage ( VDRM ) On-state Voltage ( VTM ) Critical rate of rise of off-state Voltage ( dv/dt ) ( note 1 ) Critical rate of rise of commutating Voltage ( dv/dt ) ( note 1 ) Coupled 1.2 1.5 100 V µA IF = 10mA VR = 6V 100 nA V V VDRM = 250V (note 1 ) IDRM = 100nA ITM = 100mA ( peak ) 250 1.5 0.1 Input to Output Isolation Voltage VISO 3.0 10 V/µs 0.2 V/µs I load = 15mA, VIN = 30V ( fig 1. ) mA mA mA VD = 3V ( note 2 ) Input Current to Trigger ( IFT )(note 2 ) H11J1, H11J3 H11J2, H11J4 H11J5 10 15 25 Holding Current , either direction ( IH ) TEST CONDITION µA 100 5300 7500 VRMS VPK See note 3 See note 3 Note 1. Test voltage must be applied within dv/dt rating. Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies between Rated IFT and absolute max. IFT . Note 3. Measured with input leads shorted together and output leads shorted together. FIGURE 1 +5v VCC VCC RIN + 0v 8/8/01 COMMUTATING STATIC dv/dt dv/dt - 120Ω 1 6 VIN 2 5 3 4 ~ RL 2kΩ DB92166m-AAS/A3 Normalised repetitive peak off-state voltage RMS on-state current I T (Arms) RMS On-state Current vs. Ambient Temperature 0.1 0.05 0 -30 0 25 50 75 100 Normalised Repetitive Peak Off-state Voltage vs. Ambient Temperature 1.4 1.2 1.0 0.8 Normalised to TA = 25°C 0.6 0.4 0.2 0 -30 125 0 Ambient temperature TA ( °C ) 2.8 70 2.4 On-state voltage V TM (V) Forward current I F (mA) 80 60 50 40 30 20 ) 100 2.0 1.6 1.2 0.8 10 0.4 0 0 -30 0 25 50 75 100 125 Ambient temperature TA ( °C ) 0 25 50 75 100 Ambient temperature TA ( °C ) On-state Current vs. On-state Voltage 1.4 100 FT 1.2 On-state current I TM (mA) Normalised input trigger current ( I 75 On-state Voltage vs. Ambient Temperature Normalised Input Trigger Current vs. Ambient Temperature 1.0 0.8 Normalised to TA = 25°C 0.6 0.4 0.2 0 80 60 IF = 20mA TA = 25°C 40 20 0 -30 0 25 50 75 Ambient temperature TA ( °C ) 8/8/01 50 Ambient temperature TA ( °C ) Forward Current vs. Ambient Temperature -30 25 100 0 0.4 0.8 1.2 1.6 2.0 On-state voltage VTM (V) DB92166m-AAS/A3