IS3020 IS3021,IS3022 OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC Dimensions in mm 2.54 DESCRIPTION 1 The IS3020, IS3021and IS3022 are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac mounted in a standard 6 pin dual-in-line package. FEATURE l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l 400V Peak Blocking Voltage l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l CRTs l Power Triac Driver l Motors l Consumer appliances l Printers 7.0 6.0 6 2 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 13° Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25 °C unless otherwise noted) Storage Temperature -400C - +1500C Operating Temperature -400C - +1000C Lead Soldering Temperature 2600C (1.6mm from case for 10 seconds) Input-to-output Isolation Voltage (Pk) 7500 Vac (60 Hz , 1sec. duration) INPUT DIODE Forward Current 50mA Reverse Voltage 6V Power Dissipation 70mW (derate linearly 1.33mW/0C above 250C) OUTPUT PHOTO TRIAC OPTION G OPTION SM SURFACE MOUNT 0.6 0.1 10.46 9.86 7.62 1.25 0.75 POWER DISSIPATION 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 7/12/00 Off-State Output Terminal Voltage 400V Forward Current (Peak) 1A Power Dissipation 300mW (derate linearly 4.0mW/0C above 250C) Total Power Dissipation 330mW (derate linearly 4.4mW/0C above 250C) ISOCOM INC 1024 S. Greenville Ave, Suite 240, Allen, TX 75002 USA Tel: (214) 495-0755 Fax: (214) 495-0901 e-mail [email protected] http://www.isocom.com DB92284m-AAS/A1 ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted ) PARAMETER MIN TYP MAX UNITS Input Forward Voltage (VF) Reverse Current (IR) Output Peak Off-state Current ( IDRM ) Peak Blocking Voltage ( VDRM ) On-state Voltage ( VTM ) Critical rate of rise of off-state Voltage ( dv/dt ) ( note 1 ) Critical rate of rise of commutating Voltage ( dv/dt ) ( note 1 ) Coupled 1.2 1.5 100 V µA IF = 10mA VR = 6V 100 nA V V VDRM = 400V (note 1 ) IDRM = 100nA ITM = 100mA ( peak ) 400 1.5 0.1 3.0 10 V/µs 0.2 V/µs I load = 15mA, VIN = 30V ( fig 1. ) mA mA mA VD = 3V ( note 2 ) Input Current to Trigger ( IFT )(note 2 ) IS3020 IS3021 IS3022 30 15 10 Holding Current , either direction ( IH ) µA 100 Input to Output Isolation Voltage VISO TEST CONDITION 5300 7500 VRMS VPK See note 3 See note 3 Note 1. Test voltage must be applied within dv/dt rating. Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies between Rated IFT and absolute max. IFT . Note 3. Measured with input leads shorted together and output leads shorted together. FIGURE 1 +5v VCC VCC RIN + 0v 7/12/00 COMMUTATING STATIC dv/dt dv/dt - 120Ω 1 6 VIN 2 5 3 4 ~ RL 2kΩ DB92284m-AAS/A1 DB92284m-AAS/A1