ETC MCS7784CS

MCS7784
USB to IrDa Port
Features
Applications
• Low-power 3.3V CMOS design
• On board 5V to 3.3V voltage regulator
• Single 12 MHz crystal
• IrDA data rates from 2.4 Kbps to 115.2 kbps in SIR
mode
• USB specification 1.1 compliant.
• Re-configurable Vendor specific parameters
(Vendor ID, Product ID, Release #)
• Support for 4 string descriptors (Language ID,
Manufacture ID, Product Name, Serial Number)
• Supports all USB standard commands.
• I2C interface for EEPROM
• Low-profile 28-Pin SSOP package
• Cell Phones
• Embedded applications
• Add-on IrDA dingle
General Description
The MCS7784 controller provides bridging between the
Universal Serial Bus (USB) input and IrDA port. This device contains all the necessary logic to communicate
with the host computer via the USB bus. Supports data
rate of 2.4Kbps to 115.2Kbps.
Ordering Information
In addition, the MCS7784 contains a 3.3V regulator and
operates in bus-powered mode. The MCS7784 uses
single 12 MHz crystal oscillator.
Page 2-20
Application Note
• AN7784
Evaluation Board
• MCS7784-EVB
Commercial Grade ( 0° C to +70° C )
MCS7784CS
MCS7784CS-GR
28-SSOP
28-SSOP
Standard
RoHS
MCS7784
USB to IrDa Port
MCS7784 Pin assignment
TX
1
28 XTAL2
N.C.
2
27 XTAL1
3
26 TST
4
25 AGND
RX
5
24 3.3VA
N.C.
6
GND
7
3.3V
8
N.C.
9
N.C. 10
MCS7784CS
N.C.
RSTO
23 N.C.
22 N.C.
21 GND
20 5V
19 RESET
N.C. 11
18 GND
TCLK 12
17 VOUT
EECLK 13
16 DM
EESDA 14
15 DP
Page 2-21