ETC PL-2307

PL-2307
USB TO ATAPI-4 Bridge Controller
OVERVIEW
The PL-2307 integrated circuit provides a high-speed bridge between the Universal Serial Bus (USB) system
and ATAPI-4 compliant peripheral devices. It is designed to be a flexible, high performance, and low-cost
single-chip solution for USB-to-IDE cable as well as USB ready external "IDE Box" manufacturers.
PL-2307 supports most commands and features as defined by ATAPI-4 commands. The user will be able to
customize the chip and show their identity through the external serial EEPROM support. The user could also
modify the Vendor ID, Product ID, Language ID, manufacturer string, product string, and serial number
strings of the final product. Furthermore they could use this EEPROM to store authorization/security codes.
For large quantity orders, it is also possible to modify the Maskable ROM (Read Only Memory) of PL-2307 to
better represent the final product manufacturer and thus eliminate the need for external EEPROM.
FEATURES
USB Interface
Full compliance with the Universal Serial Bus
Specification
Support ATAPI-4 PIO and PACKET commands and
5V Power
Source
5V-to-3.3V Regulator
USB Transceiver
Phase Lock Loop
USB Serial Interface Engine
Master/Slave Multiple Drives
Logic Device Module
Power Management
On chip transceivers and 5V-3.3V regulator for USB
12 MHz
Crystal
EP0
Control
EPI
Bulk Out
EP2
Bulk In
EP3
Interrupt
512
Bytes
Unified
Buffer
System Address/Data Bus
interface
512 Bytes unified data buffer dynamically allocated for
I/O Data (7:0)
Control In (7:0)
I/O Data (15:8)
Control Out (11:0)
Timer/
Counter
Dual-Thread
Micro-Controller
(6 MIPS per Thread)
Phase
Generator
upstream and downstream data transfer: Up to 700
KB/sec
Drivers provided for Microsoft Windows 98
64 Bytes
Data
Memory/
Register
4K Words
Program
ROM
Interrupt
Controller
External Serial
EEPROM
Interface
56 pins SSOP Package
ATAPI-4 Port
External EEPROM
(Optional)
SYSTEM REQUIREMENT
Intel 486DX4-100 MHz CPU or higher
One Standard USB port and has the symbol
Windows 98
Prolific Technology Inc.
7F, No. 48, Sec. 3, Nan-Kang Rd.,
Taipei, Taiwan, R. O. C.
Tel
: 886-2-2654-6363
Fax : 886-2-2654-6161
E-mail : [email protected]
http://www.prolific.com.tw
Windows is a registered trademark of
Microsoft Corporation. © 1999, Prolific
Technology Inc.
All rights reserved. March/1999