SEN-3698 SENSITRON SEMICONDUCTOR TECHNICAL DATA PART NUMBER: SEN-3698, REV. E ATP, ATR is according to document no. 5002M408-001 HIGH VOLTAGE MULTIPLIER, FAST RECOVERY DESCRIPTION: 10000 VOLT, 0.5 AMP, 70 NANOSECOND HIGH VOLTAGE MULTIPLIER. All ratings are at TA = 25oC unless otherwise MAX. RATINGS / ELECTRICAL CHARACTERISTICS specified. RATING CONDITIONS MIN TYP MAX UNIT Total Output Voltage - - - 10000 Vdc Inputs 1-4 @ 250kHz - - 2000 Vpp Inputs 5 & 6 @ 250kHz - - 2200 Vpp Output 1 4000 - - -10 kVdc Output 23, 3 2000 - - -6 kVdc Output 4, 45 4000 - - -4 kVdc Output 6 - - - 0 V - - 70000 Ft Maximum Altitude (TBD) Storage Temp. (Tstg ) - -40 - +100 °C Operating Junction Temp. - -40 - +125 °C - -40 - +100 °C If = 0.5A, Ir = 1.0A, Irr = 0.25A - - 70 nsec - - - 5.0 °C/W ±10% - - 10 pF (Tjop)_ Case Operating Temp. (Top) Reverse Recovery Time (per diode) (t rr) Thermal Resistance Terminal to Case Capacitance (CT) (θJL) • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SEN-3698 SENSITRON TECHNICAL DATA PART NUMBER: SEN-3698, REV. E CAPACITANCE VALUES CAPACITOR TOLORANCE, CAP. UNIT VOLTAGE C1, C2 ±10%, 2kV - 80 - nF C3, C4 ±10%, 3kV - 80 - nF C5 ±10%, 2kV - 33 - nF C6 ±10%, 3kV - 33 - nF C7, C8 ±10%, 2kV - 10 - nF C9, C10 ±10%, 4kV - 10 - nF MECHANICAL DIMENSIONS: In Inches / mm Note: Case finish - Black Anodized P PIN-1 I Output-23 N PIN-7 O In-1 U T TABLE PIN-2 Output-3 PIN-8 In-4 PIN-3 Output-6 PIN-9 In-5 PIN-4 In-2 PIN-10 Output-1 PIN-5 In-3 PIN-11 Output-4 PIN-6 In-6 PIN-12 Output-45 • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •