Photo diodes KODENSHI HP-2ML DIMENSIONS (Unit : mm) The HP-2ML, a high-output, high-speed silicon photodiode mounted in TO-18 type header with clear epoxy encapsulation, permits wide angular response. FEATURES •High-output power •High-speed response •Wide angular response •Relatively low-cost against metal can package APPLICATIONS •Optical detectors •Optical switches MAXIMUM RATINGS Item Reverse voltage Operating temp. Storage temp. Soldering temp. *1 (Ta=25℃) Symbol Rating Unit VR Topr. Tstg. Tsol. 5 -20~+80 -20~+80 260 V ℃ ℃ ℃ *1. For MAX.5 seconds at the position of 2 mm from the package ELECTRO-OPTICAL CHARACTERISTICS Item Open circuit voltage Short circuit current Dark current Curve factor Capacitance Temperature coefficient of VOC Temperature coefficient of ISC Spectral sensitivity Peak wavelength Half angle Symbol VOC ISC Id C.F. Ct αt βt λ λp Δθ (Ta=25℃) Conditions Min. Typ. Max. 0.38 28 EV =1,000lx *2 VR =5V 1 0.55 V=0V, f=1MHz *2. Color temp.=2856K standard Tungsten lamp - 1- 60 -2.2 0.18 450~1,050 900 ±60 Unit. V μA μA pF mV/℃ %/℃ nm nm deg. Photo diodes HP-2ML Light current Vs. Forward voltage Relative sensitivity Vs. Wavelength Short circuit current Vs. Illuminance Dark current Vs. Ambient temperature Dark current Vs. Reverse voltage Radiant Pattern Capacitance between terminals Vs. Reverse voltage - 2-