TL7759 SUPPLY-VOLTAGE SUPERVISORS SLVS042D – JANUARY 1991 – REVISED JULY 1999 D D D D D D D D, P, OR PW PACKAGE (TOP VIEW) Power-On Reset Generator Automatic Reset Generation After Voltage Drop Precision Input Threshold Voltage . . . 4.55 V ±120 mV Low Standby Current . . . 20 µA Reset Outputs Defined When VCC Exceeds 1 V True and Complementary Reset Outputs Wide Supply-Voltage Range . . . 1 V to 7 V NC NC NC GND 1 8 2 7 3 6 4 5 RESET RESET NC VCC NC – No internal connection description The TL7759 is a supply-voltage supervisor designed for use as a reset controller in microcomputer and microprocessor systems. The supervisor monitors the supply voltage for undervoltage conditions. During power up, when the supply voltage, VCC, attains a value approaching 1 V, the RESET and RESET outputs become active (high and low, respectively) to prevent undefined operation. If the supply voltage drops below the input threshold voltage level (VIT– ), the reset outputs go to the reset active state until the supply voltage has returned to its nominal value (see timing diagram). The TL7759C is characterized for operation from 0°C to 70°C. AVAILABLE OPTIONS PACKAGED DEVICES TA SMALL OUTLINE (D) PLASTIC DIP (P) SHRINK SMALL OUTLINE (PW) CHIP FORM (Y) 0°C to 70°C TL7759CD TL7759CP TL7759CPW TL7759Y The D and PW packages are available taped and reeled. Add the suffix R to the device type (e.g., TL7759CDR). Chip forms are tested at 25°C. functional block diagram 5 + 7 – 8 VCC RESET RESET Reference Voltage 4 GND Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1999, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TL7759 SUPPLY-VOLTAGE SUPERVISORS SLVS042D – JANUARY 1991 – REVISED JULY 1999 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V Off-state output voltage range: RESET voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 20 V RESET voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 20 V Low-level output current, IOL (RESET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA High-level output current, IOH (RESET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10 mA Package thermal impedance, θJA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . 127°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values are with respect to the network ground terminal. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability. 3. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length of zero. recommended operating conditions Supply voltage, VCC MIN MAX 1 7 15 Transistor off RESET voltage Output voltage, voltage VO (see Note 4) Transistor off RESET voltage Low-level output current, IOL RESET High-level output current, IOH RESET Operating free-air temperature, TA TL7759C 0 0 UNIT V V 24 mA –8 mA 70 °C NOTE 4: RESET output must not be pulled down below GND potential. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TL7759C PARAMETER VOL VOH TEST CONDITIONS Low-level output voltage RESET High-level output voltage RESET IOL = 24 mA IOH = –8 mA VCC = 4 4.3 3V VIT IT– Input threshold voltage g (negative-going VCC) TA = 25°C TA = 0°C to 70°C Vres§ Power up reset voltage Power-up RL = 2.2 2 2 kΩ Vhys¶ Hysteresis at VCC input TA = 25°C TA = 0°C to 70°C IOH IOL High-level output current RESET Low-level output current RESET ICC Supply current MIN VCC–1 4.43 TYP‡ MAX 0.4 0.8 4.55 4.67 4.7 0.8 1 1.2 40 50 60 30 VCC = 7 V V, See Figure 1 VOH = 15 V VOL = 0 V No load VCC = 4.3 V VCC = 5.5 V 70 1400 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V V mV 1 µA –1 µA 2000 ‡ Typical values are at TA = 25°C. § This is the lowest voltage at which RESET becomes active, VCC slew rate ≤ 5 V/µs. ¶ This is the difference between positive-going input threshold voltage, VIT+, and negative-going input threshold voltage, VIT–. 2 V V 4.4 TA = 25°C TA = 0°C to 70°C UNIT 40 µA TL7759 SUPPLY-VOLTAGE SUPERVISORS SLVS042D – JANUARY 1991 – REVISED JULY 1999 electrical characteristics, TA = 25°C (unless otherwise noted) TL7759Y PARAMETER TEST CONDITIONS VOL Low-level output voltage VIT– Vres† Input threshold voltage (negative-going VCC) RESET Power-up reset voltage VCC = 4.3 V, MIN IOL = 24 mA RL = 2.2 kΩ TYP MAX UNIT 0.4 V 4.55 V 0.8 V Vhys‡ Hysteresis at VCC input 50 ICC Supply current VCC = 4.3 V, No load 1400 † This is the lowest voltage at which RESET becomes active, VCC slew rate ≤ 5 V/µs. ‡ This is the difference between positive-going input threshold voltage, VIT+, and negative-going input threshold voltage, VIT–. mV µA timing diagram VCC VIT+ Vres VIT– ÇÇ ÇÇ ÇÇ ÇÇ ÇÇ ÇÇ 0 RESET Output Undefined for VCC Less Than 1 V VIT – Vres VIT+ 0 Output Undefined switching characteristics at TA = 25°C (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS TL7759C MIN MAX UNIT tPLH Propagation delay time, low-to high-level output VCC RESET See Figures 2 and 3§ 5 µs tPHL Propagation delay time, high-to low-level output VCC RESET See Figures 2 and 4 5 µs tr Rise time RESET See Figures 2 and 4§ 1 µs tf Fall time RESET See Figures 2 and 4 1 µs tw(min) Minimum pulse duration RESET See Figures 2 and 4 VCC 5 µs § VCC slew rate ≤ 5 V/µs POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 TL7759 SUPPLY-VOLTAGE SUPERVISORS SLVS042D – JANUARY 1991 – REVISED JULY 1999 PARAMETER MEASUREMENT INFORMATION 15 V VCC RESET + 7V A TL7759 _ RESET GND A Figure 1. Test Circuit for Output Leakage Current 4.8 V VCC (see Note A) 4.3 V tPLH tPHL 90% 90% RESET 50% 50% 10% 10% tr tf NOTE A: VCC slew rate ≤ 5 V/µs. Figure 2. Switching Diagram VCC Pulse Generator TL7759 0.1 mF RESET GND RL = 1 kΩ CL = 100 pF† † CL Includes jig and probe capacitance. Figure 3. Test Circuit for RESET Output Switching Characteristics VCC Pulse Generator 0.1 mF RL= 1k Ω RESET TL7759 GND CL = 100 pF† † CL Includes jig and probe capacitance. Figure 4. Test Circuit for RESET Output Switching Characteristics 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TL7759 SUPPLY-VOLTAGE SUPERVISORS SLVS042D – JANUARY 1991 – REVISED JULY 1999 APPLICATION INFORMATION 5V 0.1 µF 5 VCC RESET 7 System Reset TL7759 RESET 8 1 kΩ GND 4 Figure 5. Power-Supply System Reset Generation POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL7759CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7759CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7759CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CPW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CPWE4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CPWLE OBSOLETE TSSOP PW 8 TL7759CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7759CPWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MPDI001A – JANUARY 1995 – REVISED JUNE 1999 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.020 (0,51) MIN 0.015 (0,38) Gage Plane 0.200 (5,08) MAX Seating Plane 0.010 (0,25) NOM 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.430 (10,92) MAX 0.010 (0,25) M 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated