NTE1115 & NTE1115A Integrated Circuit Audio Power Amplifier, 7W Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high output current (up to 2.5A), high efficiency (75% at 6W output), very low harmonic and cross–over distortion. In addition, thermal protection is provided. Absolute Maximum Ratings: Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Output Peak Current (Non–Repetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5A Output Current (Repetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5A Power Dissipation, Ptot TA = +70°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W Ttab = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C Thermal Resistance, Junction–to–Tab, RthJ–TAB NTE1115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10°C/W NTE1115A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12°C/W Thermal Resistance, Junction–to–Ambient, RthJA NTE1115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NTE1115A (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W Note 1. Obtained with tabs soldered to printed circuit with minimized copper area. Elecrtrical Characteristics: (TA = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit 4 – 20 V 6.4 7.2 8.0 V Supply Voltage (Pin1) VS Quiescent Output Voltage (Pin12) VO Quiescent Drain Current Id – 12 20 mA Bias Current (Pin8) Ib – 0.4 – µA VS = 14.4V Elecrtrical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Symbol Power Output PO Input Voltage THD = 10%, RL = 4Ω, f = 1kHz Min Typ – 7.0 – W 5.5 6.0 – W VS = 9V – 2.5 – W VS = 6V – 1.0 – W – – 22 mW Rf = 56Ω – 80 – mV Rf = 22Ω – 35 – mV – 5 – MΩ VS = 16V VS = 14.4V Vi(rms) Input Sensitivity Vi Input Resistance (Pin8) Ri Frequency Response (–3dB) B Total Harmonic Distortion THD Voltage Gain (Open Loop) GV Voltage Gain (Closed Loop) GV Input Noise Voltage eN Input Noise Current Efficiency PO = 6W, VS = 14.4V, RL = 4Ω, Ω f = 1kHz VS = 14.4V, RL = 4Ω Max Unit C3 = 820pF 40 to 20,000 Hz C3 = 1500pF 40 to 10,000 Hz PO = 50mW to 3W, VS = 14.4V, RL = 4Ω, f = 1kHz – 0.3 – % VS = 14.4V, RL = 4Ω, f = 1kHz – 80 – dB 34 37 40 dB VS = 14.4V, Rg = 0, B (–3dB) = 20Hz to 20kHz – 2 – µV iN VS = 14.4V, B (–3dB) = 20Hz to 20kHz – 0.1 – nA h PO = 5W, VS = 14.4V, RL = 4Ω, f = 1kHz – 70 – % VS = 14.4V, RL = 4Ω, fripple = 100Hz – 38 – dB SVR Pin Connection Diagram VCC 1 12 Output N.C. 2 11 N.C. N.C. 3 10 GND Bootstrap 4 Compensation 5 Feedback 6 Tab Tab Supply Voltage Rejection Test Conditions 9 Substrate GND 8 Input 7 Ripple Rejection NTE1115 .250 (6.35) .142 (3.6) Dia 12 7 1.004 (25.5) Max .650 (16.5) 1 6 .770 (19.5) Max .265 (6.7) .060 (4.0) .100 (2.54) .700 (17.78) NTE1115 Alt. .250 (6.35) .142 (3.6) Dia 12 1.004 (25.5) Max 7 .650 (16.5) 1 6 .770 (19.5) Max .265 (6.7) .060 (4.0) .100 (2.54) .700 (17.78) NTE1115A .247 (6.27) 12 7 1 6 .677 (17.2) .770 (19.5) Max .260 (6.6) .233 (5.9) Max .100 (2.54) .700 (17.78) .099 (2.5) Min