NTE1761 (Active High) & NTE1762 (Active Low) Integrated Circuit Infrared Remote Control Preamp Features: D High Frequency Amplifier with a Control Range of 66dB D Synchronous Demodulator and Reference Amplifier D AGC Detector D Pulse Shaper D Q–Factor Killing of the Input Selectivity, which is Controlled by the AGC Circuit D Input Voltage Limiter Absolute Maximum Ratings: Supply Voltage (Pin8), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.2V Output Current Pulse Shaper (Pin11), I11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Voltages Between Pins (Note 1) Pin2 and Pin15, V2–15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V Pin4 and Pin13, V4–13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V Pin5 and Pin6, V5–6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V Pin7 and pin10, V7–10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V Pin9 and Pin11, V9–11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V Operating Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –25° to +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C Note 1. All pins except Pin11 are short–circuit protected. DC Electrical Characteristics: (TA = +25°C, VCC = V8 = 5V unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Supply (Pin8) Supply Voltage VCC 4.65 5.0 5.35 V Supoply Current ICC = I8 1.2 2.1 3.0 mA V2–15(P–P) f = 36kHz, Note 2 – 15 25 µV f = 36kHz, Note 3 – – 5 µV 60 66 – dB 0.02 – 200 mV Controlled High Frequency Amplifier (Pin2 and Pin15) Minimum Input Signal (Peak–to–Peak) AGC Control Ragne (Without Q–Killing) Input Signal for Correct Operation (Peak–to–Peak) V2–15(P–P) Note 3 Q–Killing Inactive (Peak–to–Peak) V2–15(P–P) I3 = I14 < 0.5µA – – 140 µV Q–Killing Active (Peak–to–Peak) V2–15(P–P) I14 = I3 = Max 28 – – mV Note 2. For NTE1761, voltage at Pin9 is HIGH (–I9 = 75µA). For NTE1762, voltage at Pin9 is LOW (I9 = 75µA). Note 3. For NTE1761, voltage at Pin9 remains LOW. For NTE1762, voltage at Pin9 remains HIGH. DC Electrical Characteristics (Cont’d): (TA = +25°C, VCC = V8 = 5V unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Inputs Pin2 Voltage V2 2.25 2.45 2.65 V Pin15 Voltage V15 2.25 2.45 2.65 V Pin2 Resistance R2–15 10 15 20 kΩ Pin2 Capacitance C2–15 – 3 – pF Input Limiting, Pin1 V1–16 I1 = 3mA – 0.8 0.9 V Output Voltage HIGH (Pin9) –V9–8 –I9 = 75µA – 0.1 0.5 V Output Voltage LOW (Pin9) V9 I9 = 75µA – 0.1 0.5 V Output Current, Output Voltage HIGH –I9 V9 = 4.5V 75 120 – µA V9 = 3.0V 75 130 – µA V9 = 1.0V 75 140 – µA V9 = 0.5V 75 120 – µA 3.1 4.7 6.2 kΩ Outputs Output Current, Output Voltage LOW I9 Output Resistance Between Pin7 and Pin10 R7–10 Pulse Shaper (Pin11) Trigger Level in Positive Direction V11 Voltage Pin9 changes from HIGH to LOW 3.75 3.9 4.05 V Trigger Level in Negative Direction V11 Voltage Pin9 changes from LOW to HIGH 3.4 3.55 3.7 V Hysteresis of Trigger Levels ∆V11 0.25 0.35 0.45 V AGC Capacitor Charge Current –I12 3.3 4.7 6.1 µA AGC Capacitor Discharge Current I12 67 100 133 µA AGC Detector (Pin12) Q–Factor Killer (Pin3 and Pin14) Output Current (Pin3) –I3 V12–16 = 2V 2.5 7.5 15 µA Output Current (Pin14) –I14 V12–16 = 2V 2.5 7.5 15 µA Note 4. Undistorted output pulse with 100% AM input. Pin Connection Diagram Input Signal 1 Input Signal 2 Q Factor Input 3 16 GND 15 Input Signal 14 Q Factor Input Feedback Cap Input 4 13 Feedback Cap Input Feedback Cap Input 5 12 AGC Detector Time Constant Feedback Cap Input 6 11 Pulse Shaper Capacitor Coil Input 7 VCC 8 10 Coil Input 9 Output 16 9 .260 (6.6) Max 1 8 .300 (7.62) .785 (19.9) Max .200 5.08) Max .245 (6.22) Min .100 (2.54) .700 (17.7)