NTE1912 Integrated Circuit Positive 3 Terminal Voltage Regulator, 12V, 3A Description: The NTE1912 is a 3 terminal fixed positive voltage regulator in a TO3 type package designed for use in applications requiring a well regulated positive output voltage. Outstanding features include full power usage up to 3A of load current, internal current limiting, thermal shutdown, and safe area protection on the chip, providing protection of the series pass Darlington, under most operating conditions. Hermetically sealed steel packages are utilized for high reliability and low thermal resistance. A low–noise temperature stable band–gap reference is the key design factor insuring excellent temperature regulation of the NTE1912. This coupled to a very low output impedance insures superior load regulation. Features: D Guaranteed Power Dissipation: PD = 30W @ TC = 57.5°C D Guaranteed Input–Output Differential: VIN – VO = +2.5V D Low Noise, Band Gap Reference D Remote Sense Capability D Sample Power Cycled Burn–In D Guaranteed Thermal Resistance Junction to Case: RΘJC = 2.25°C/W Absolute Maximum Ratings: Input Voltage (Note 1), VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited Derate Above TC = 57.5°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444mW/°C Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C Lead Temperature (During Soldering, 60sec Max), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C Thermal Resistance, Junction to Case, RΘJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.25°C/W Note 1. Short circuit protection is only assured to VINmax. In case of short circuit, with input–output voltages approaching VINmax, regulator may require the removal of the input voltage to restart. Electrical Characteristics: (TJ = +25°C unless otherwise specified) Parameter Symbol Output Voltage VO Test Conditions Min Typ Max Unit 11.05 12.0 13.05 V 2.5 – – V – – 1.0 % VO – – 0.6 % VO VIN = 15V, IO = 10mA – – 20 mA VIN = 15V to 22V, IO = 10mA to 3A, Note 2 Input–Output Differential VIN–VO IO = 3A, TJ = 0 to +125°C Line Regulation RegLine VIN = 15V to 27V, IO = 2A, Note 2 Load Regulation RegLoad VIN = 17V, IO = 10mA to 3A, Note 2 Quiescent Current IQ Quiescent Current Line IQ(Line) VIN = 15V to 22V, IO = 10mA – – 5 mA Quiescent Current Load IQ(Load) VIN = 15V, IO = 10mA to 3A – – 5 mA Current Limit ILIM VIN = 17V, Note 2 – – 6.5 A Temperature Coefficient TC VIN = 15V, IO = 100mA, TJ = 0 to +125°C – – 0.02 % VO/°C Output Noise Voltage VN VIN = 15V, IO = 100mA. TJ = 0 to +125°C, Note 3 – – 10 µVrms/V Ripple Attenuation RA VIN = 17V, IO = 2A, TJ = 0 to +125°C, Note 4 60 – – dB Power Dissipation PD VIN – VO (2.5V to 10V), IO = 10mA to 3A, TJ = 0 to +125°C – – 30 W Note 2. Low duty cycle pulse testing with Kelvin connections required. Die temperature changes must be accounted for separatly. Note 3. BW = 10Hz to 100kHz. Note 4. Ripple attenuation is specified for a 1Vrms, 120Hz, input ripple. Ripple attenuation is minimum of 60dB at 5V output and is 1dB less for each volt increase in the output voltage. .135 (3.45) Max .350 (8.89) .875 (22.2) Dia Max Seating Plane .312 (7.93) Min .040 (1.02) 1.187 (30.16) VOUT .665 (16.9) .215 (5.45) .156 (3.96) Dia (2 Holes) .430 (10.92) .188 (4.8) R Max VIN .525 (13.35) R Max Common/Case