NTE2026 Integrated Circuit Gas–Discharge Display Driver Description: The NTE2026 is a monolithic high–voltage bipolar integrated circuit which dramatically reduces the number of discrete components required to link MOS, or other low–voltage circuitry, with the anodes of gas–discharge display panels. This device contains six drivers. Each driver has appropriate level shifting, signal amplification, output off–state voltage bias, and 40mA output current sourcing for sequential addressing of display panel anodes. The inputs include pull–down resistors for direct connection to open–drain PMOS logic. The NTE2026 can be used in a wide variety of low– to high–voltage applications. High reliability, small size, ease of installation, and low cost make this device an ideal choice for many applications. Features: D TTL/MOS Compatible Inputs D High Output Breakdown Voltage D High Output Current capability D Low Power D Reliable Monolithic Construction Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VBB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +115V Input Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +20V Output Current, IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40mA Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1W Derate Above +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.7mW/°C Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Recommended Operating Conditions: Parameter Symbol Min Typ Max Unit Supply Voltage VBB – – 100 V Input ON Voltage VIN 2.4 – 15 V Output ON Current IIN – – 25 mA Electrical Characteristics: (TA = +25°C, VBB = 110V, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Output Leakage Current IOUT VIN = 0.4V, TA = +70°C – – 15 µA Output OFF Voltage VOUT VIN = 0.4V – – 1.0 V Output Pull–Down Current IOUT Input Open, VOUT = VBB 600 900 1500 µA Output ON Voltage VOUT VIN = 2.4V, IOUT = –25mA 107 108 – V VIN = 2.4V – 120 225 µA VIN = 5.0V – 375 650 All Input Open – 10 100 µA Two Inputs = 2.4V – 2.5 4.5 mA Input ON Current IIN Supply Current IBB Note 1. Positive (negative) current is defined as going into (coming out of) the specified device pin. Pin Connection Diagram Input 1 1 16 Output 1 N.C 2 15 N.C. Input 2 3 14 Output 2 Input 3 4 13 Output 3 Input 4 5 12 Output 4 Input 5 6 11 Output 5 Input 6 7 10 Output 6 GND 8 9 VBB 16 9 1 8 .870 (22.0) Max .260 (6.6) Max .200 (5.08) Max .100 (2.54) .700 (17.78) .099 (2.5) Min