TACT SWITCHES SERIES 600 SWITCHES SLIDE SWITCHES - MINIATURE SPECIFICATIONS Dependent upon contact material Life Expectancy: 10,000 cycles typical Contact Resistance: 10 mΩ max. typical @ 2-4 VDC 100mA for both silver and gold plated contacts Insulation Resistance: 1,000MΩ min. Dielectric Strength: 1,000 V rms at sea level Operating Temperature: -30°C to 85°C FEATURES & BENEFITS Single & double pole options Multiple termination options Multiple actuator options Plastic switch body housing ▲ ▲ ▲ SLIDE SWITCHES ROCKER SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES NAVIGATION SWITCHES Contact Rating: APPLICATIONS/MARKETS Computer servers/peripherals Consumer electronics Instrumentation Test & measurement MATERIALS Housing: Polybutylene terephthalate (PBT) Cover: Polybutylene terephthalate (PBT) Actuator: Polybutylene terephthalate (PBT) Contact & Terminals: Silver or gold plated copper alloy HOW TO ORDER SERIES MODEL NO. ACTUATOR TERMINATION SP1 DP1 SP3 DP3 S1 S2 S3 S4 M1* M2** M3* M4** CONTACT MATERIAL ▲ ▲ ▲ DIP SWITCHES SNAP-ACTION SWITCHES 600 Q = Silver R = Gold *SPDT Only. **DPDT Only. Example Ordering Number 600_ SP1_ S3_ M1_ R SPDT DPDT POS 1 Model No. SP-1 SP-3 Term. Comm. ON ON 2-1 POS 2 NONE OFF OPEN POS 3 Model No. DP-1 DP-3 Term. Comm. ON ON 2-3 ( ) = Momentary POS 1 POS 2 POS 3 ON ON 2-1,5-4 NONE OFF OPEN ON ON 2-3,5-6 ( ) = Momentary SCHEMATIC SCHEMATIC CAP OPTIONS DETECTOR SWITCHES ROTARY SWITCHES KEYLOCK SWITCHES Specifications subject to change without notice. 184 Phone: 800-867-2717 Fax: 763-531-8235 TACT SWITCHES ACTUATOR OPTIONS NAVIGATION SWITCHES S1 SPDT PUSHBUTTON SWITCHES RECESSED ACTUATOR TOGGLE SWITCHES DPDT S2 ROCKER SWITCHES EXTENDED ACTUATOR SLIDE SWITCHES DPDT S3 DIP SWITCHES SPDT SNAP-ACTION SWITCHES SIDE ACTUATOR DPDT PC MOUNTING SPDT M2 DPDT M3 SPDT M4 DPDT DETECTOR SWITCHES ROTARY SWITCHES M1 KEYLOCK SWITCHES SPDT CONTACT MATERIAL OPTIONS Q Fixed Terminal: Silver plated copper alloy Fixed Terminal: Copper alloy with gold plate over nickel plate Moving Contact: Silver plated copper alloy Moving Contact: Copper alloy with gold plate over nickel plate Rating: 1 Amp with resistive load @ 30VDC Rating: 0.4 Volt-Amps (VA) max. @ 20V max. (AC or DC) www.e-switch.com info @ e-switch.com CAP OPTIONS R 185