INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
• The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT4053
Triple 2-channel analog
multiplexer/demultiplexer
Product specification
File under Integrated Circuits, IC06
December 1990
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
The 74HC/HCT4053 are triple 2-channel analog
multiplexers/demultiplexers with a common enable input
(E). Each multiplexer/demultiplexer has two independent
inputs/outputs (nY0 and nY1), a common input/output (nZ)
and three digital select inputs (S1 to S3).
FEATURES
• Low “ON” resistance:
80 Ω (typ.) at VCC − VEE = 4.5 V
70 Ω (typ.) at VCC − VEE = 6.0 V
60 Ω (typ.) at VCC − VEE = 9.0 V
With E LOW, one of the two switches is selected (low
impedance ON-state) by S1 to S3. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S1 to S3.
• Logic level translation:
to enable 5 V logic to communicate
with ± 5 V analog signals
• Typical “break before make” built in
VCC and GND are the supply voltage pins for the digital
control inputs (S1, to S3, and E). The VCC to GND ranges
are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The
analog inputs/outputs (nY0 and nY1, and nZ) can swing
between VCC as a positive limit and VEE as a negative limit.
VCC − VEE may not exceed 10.0 V.
• Output capability: non-standard
• ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT4053 are high-speed Si-gate CMOS
devices and are pin compatible with the “4053” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
For operation as a digital multiplexer/demultiplexer, VEE is
connected to GND (typically ground).
QUICK REFERENCE DATA
VEE = GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
TYPICAL
SYMBOL
PARAMETER
CONDITIONS
UNIT
HC
tPZH/ tPZL
tPHZ/ tPLZ
turn “ON” time
HCT
CL = 15 pF; RL = 1 kΩ; VCC = 5 V
E to VOS
17
23
ns
Sn to VOS
21
21
ns
E to VOS
18
20
ns
Sn to VOS
turn “OFF” time
17
19
ns
CI
input capacitance
3.5
3.5
pF
CPD
power dissipation capacitance per switch notes 1 and 2
36
36
pF
CS
max. switch capacitance
independent (Y)
5
5
pF
common
8
8
pF
(Z)
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi+∑ {(CL+CS) × VCC2 × fo} where:
fi = input frequency in MHz; fo = output frequency in MHz
∑ {(CL+CS) × VCC2 × fo} = sum of outputs
CL = output load capacitance in pF; CS = max. switch capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
December 1990
2
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
PIN DESCRIPTION
PIN NO.
SYMBOL
NAME AND FUNCTION
2, 1
2Y0 to, 2Y1
independent inputs/outputs
5, 3
3Y0 to, 3Y1
independent inputs/outputs
6
E
enable input (active LOW)
7
VEE
negative supply voltage
8
GND
ground (0 V)
11, 10, 9
S1 to S3
select inputs
12, 13
1Y0, 1Y1
independent inputs/outputs
14, 15, 4
1Z to 3Z
common inputs/outputs
16
VCC
positive supply voltage
Fig.1 Pin configuration.
December 1990
Fig.2 Logic symbol.
3
Fig.3 IEC logic symbol.
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
APPLICATIONS
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
FUNCTION TABLE
INPUTS
CHANNEL ON
E
Sn
L
L
L
H
nY0 − nZ
nY1 − nZ
H
X
none
Note
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
Fig.4 Functional diagram.
Fig.5 Schematic diagram (one switch).
December 1990
4
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to VEE = GND (ground = 0 V)
SYMBOL
PARAMETER
MIN.
−0.5
MAX.
UNIT
CONDITIONS
VCC
DC supply voltage
+11.0
V
±IIK
DC digital input diode current
20
mA
for VI < −0.5 V or VI > VCC + 0.5 V
±ISK
DC switch diode current
20
mA
for VS < −0.5 V or VS > VCC + 0.5 V
±IS
DC switch current
25
mA
for −0.5 V < VS < VCC + 0.5 V
±IEE
DC VEE current
20
mA
±ICC; ±IGND
DC VCC or GND current
50
mA
Tstg
storage temperature range
+150
°C
Ptot
power dissipation per package
PS
−65
for temperature range: −40 to + 125 °C
74HC/HCT
plastic DIL
750
mW
above + 70 °C: derate linearly with 12 mW/K
plastic mini-pack (SO)
500
mW
above + 70 °C: derate linearly with 8 mW/K
power dissipation per switch
100
mW
Note to ratings
To avoid drawing VCC current out of terminals nZ, when switch current flows in terminals nYn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals nZ, no VCC current will flow out
of terminals nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at nYn and nZ may
not exceed VCC or VEE.
RECOMMENDED OPERATING CONDITIONS
74HC
74HCT
SYMBOL PARAMETER
UNIT
min.
typ.
max.
min. typ.
CONDITIONS
max.
VCC
DC supply voltage VCC−GND
2.0
5.0
10.0
4.5
5.0
5.5
V
see Figs 6 and 7
VCC
DC supply voltage VCC−VEE
2.0
5.0
10.0
2.0
5.0
10.0
V
see Figs 6 and 7
VI
DC input voltage range
GND
VCC
GND
VCC
V
VS
DC switch voltage range
VEE
VCC
VEE
VCC
V
Tamb
operating ambient temperature
range
−40
+85
−40
+85
°C
operating ambient temperature
range
−40
+125 −40
+125
°C
CHARACTERISTICS
ns
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VCC = 10.0 V
Tamb
tr, tf
input rise and fall times
December 1990
see DC and AC
1000
500
400
250
6.0
5
6.0
500
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
Fig.6
74HC/HCT4053
Fig.7
Guaranteed operating area as a function of
the supply voltages for 74HC4053.
Guaranteed operating area as a function
of the supply voltages for 74HCT4053.
DC CHARACTERISTICS FOR 74HC/HCT
For 74HC: VCC − GND or VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC − GND = 4.5 and 5.5 V; VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V
Tamb (°C)
TEST CONDITIONS
74HC/HCT
SYMBOL
PARAMETER
−40 to +85
+ 25
min. typ. max. min. max.
−40 to +125
min.
UNIT
VCC
(V)
VEE
(V)
IS
(µA)
Vis
VI
max.
RON
ON resistance
(peak)
−
100
90
70
−
180
160
130
−
225
200
165
−
270
240
195
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100 VCC
1000 to
1000 VEE
1000
VIH
or
VIL
RON
ON resistance
(rail)
150
80
70
60
−
140
120
105
−
175
150
130
−
210
180
160
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100 VEE
1000
1000
1000
VIH
or
VIL
RON
ON resistance
(rail)
150
90
80
65
−
160
140
120
−
200
175
150
−
240
210
180
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100 VCC
1000
1000
1000
VIH
or
VIL
∆RON
maximum ∆ON
resistance
between any two
channels
−
9
8
6
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
VCC
to
VEE
VIH
or
VIL
Notes to the characteristics
1. At supply voltages (VCC − VEE) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
2. For test circuit measuring RON see Fig.8.
December 1990
6
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
DC CHARACTERISTICS FOR 74HC
Voltages are referenced to GND (ground = 0 V)
Tamb (°C)
TEST CONDITIONS
74HC
SYMBOL
PARAMETER
−40 to +85
+25
min. typ. max. min.
VIH
HIGH level input
voltage
VIL
LOW level input
voltage
±II
1.5
3.15
4.2
6.3
1.2
2.4
3.2
4.7
1.5
3.15
4.2
6.3
min.
UNIT
VCC
V
V
2.0
4.5
6.0
9.0
VEE
V
VI
OTHER
max.
1.5
3.15
4.2
6.3
0.5
1.35
1.8
2.7
0.5
1.35
1.8
2.7
0.5
1.35
1.8
2.7
V
2.0
4.5
6.0
9.0
input leakage
current
0.1
0.2
1.0
2.0
1.0
2.0
µA
6.0
0
10.0 0
VCC
or
GND
±IS
analog switch
OFF-state
current per
channel
0.1
1.0
1.0
µA
10.0 0
VIH
or
VIL
VS =
VCC − VEE
(see Fig.10)
±IS
analog switch
OFF-state current
all channels
0.1
1.0
1.0
µA
10.0 0
VIH
or
VIL
VS =
VCC − VEE
(see Fig.10)
±IS
analog switch
ON-state
current
0.1
1.0
1.0
µA
10.0 0
VIH
or
VIL
VS =
VCC − VEE
(see Fig.11)
ICC
quiescent supply
current
8.0
16.0
80.0
160.0
160.0 µA
320.0
6.0
0
10.0 0
VCC Vis = VEE
or
or VCC;
GND VOS = VCC
or VEE
December 1990
0.8
2.1
2.8
4.3
max.
−40 to +125
7
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
74HC
SYMBOL PARAMETER
+25
min.
typ.
max.
−40 to +85
−40 to +125
min.
min.
max.
UNIT
VCC
(V)
VEE
(V)
OTHER
max.
tPHL/ tPLH
propagation delay
Vis to Vos
15
5
4
4
60
12
10
8
75
15
13
10
90
18
15
12
ns
2.0
4.5
6.0
4.5
0
RL = ∞;
0
CL = 50 pF
(see Fig.18)
0
−4.5
tPZH/ tPZL
turn “ON” time
E to Vos
60
20
16
15
220
44
37
31
275
55
47
39
330
66
56
47
ns
2.0
4.5
6.0
4.5
0
0
0
−4.5
RL = 1 kΩ;
CL = 50 pF
(see Figs 19,
20 and 21)
tPZH/ tPZL
turn “ON” time
Sn to Vos
75
25
20
15
220
44
37
31
275
55
47
39
330
66
56
47
ns
2.0
4.5
6.0
4.5
0
0
0
−4.5
RL = 1 kΩ;
CL = 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ
turn “OFF” time
E to Vos
63
21
17
15
210
42
36
29
265
53
45
36
315
63
54
44
ns
2.0
4.5
6.0
4.5
0
0
0
−4.5
RL = 1 kΩ;
CL = 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ
turn “OFF” time
Sn to Vos
60
20
16
15
210
42
36
29
265
53
45
36
315
63
54
44
ns
2.0
4.5
6.0
4.5
0
0
0
−4.5
RL = 1 kΩ;
CL = 50 pF
(see Figs 19,
20 and 21)
December 1990
8
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
DC CHARACTERISTICS FOR 74HCT
Voltages are referenced to GND (ground = 0 V)
Tamb (°C)
TEST CONDITIONS
74HCT
SYMBOL
PARAMETER
+25
min.
VIH
HIGH level input
voltage
VIL
LOW level input
voltage
±II
2.0
typ.
max.
1.6
−40 to +125
min.
min.
max.
2.0
UNIT VCC VEE
(V) (V)
VI
OTHER
max.
2.0
V
4.5
to
5.5
0.8
0.8
0.8
V
4.5
to
5.5
input leakage
current
0.1
1.0
1.0
µA
5.5
±IS
analog switch
OFF-state
current per
channel
0.1
1.0
1.0
µA
10.0 0
VIH
or
VIL
VS =
VCC − VEE
Fig.10
±IS
analog switch
OFF-state
current all
channels
0.1
1.0
1.0
µA
10.0 0
VIH
or
VIL
VS =
VCC − VEE
analog switch
ON-state current
0.1
VIH
or
VIL
VS =
VCC − VEE
±IS
ICC
quiescent supply
current
∆ICC
additional
quiescent supply
current per input
pin for unit load
coefficient is 1
(note 1)
1.2
−40 to +85
100
1.0
1.0
µA
0
10.0 0
VCC
or
GND
80.0
160.0
160.0
320.0
µA
5.5
5.0
0
VCC Vis = VEE
−5.0 or
or VCC;
GND VOS = VCC
or VEE
360
450
490
µA
4.5
to
5.5
0
VCC
−2.1
V
1. The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given here.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
UNIT LOAD COEFFICIENT
Sn
E
0.50
0.50
December 1990
Fig.11
8.0
16.0
Note to HCT types
INPUT
Fig.10
9
other
inputs
at VCC or
GND
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
74HCT
SYMBOL PARAMETER
+25
min.
typ.
max.
−40 to +85
−40 to +125
min.
min.
max.
UNIT
VCC
(V)
VEE
(V)
OTHER
max.
tPHL/ tPLH
propagation delay
Vis to Vos
5
4
12
8
15
10
18
12
ns
4.5
4.5
0
RL = ∞;
−4.5 CL = 50 pF
(see Fig.18)
tPZH/ tPZL
turn “ON” time
E to Vos
27
16
48
34
60
43
72
51
ns
4.5
4.5
0
RL = 1 kΩ;
−4.5 CL = 50 pF
(see Figs 19,
20 and 21)
tPZH/ tPZL
turn “ON” time
Sn to Vos
25
16
48
34
60
43
72
51
ns
4.5
4.5
0
RL = 1 kΩ;
−4.5 CL = 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ
turn “OFF” time
E to Vos
24
15
44
31
55
39
66
47
ns
4.5
4.5
0
RL = 1 kΩ;
−4.5 CL = 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ
turn “OFF” time
Sn to Vos
22
15
44
31
55
39
66
47
ns
4.5
4.5
0
RL = 1 kΩ;
−4.5 CL = 50 pF
(see Figs 19,
20 and 21)
December 1990
10
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
Fig.8 Test circuit for measuring RON.
Fig.9
Typical RON as a function of input voltage
Vis for Vis = 0 to VCC − VEE.
Fig.10 Test circuit for measuring OFF-state current.
Fig.11 Test circuit for measuring ON-state current.
December 1990
11
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; Tamb = 25 °C
SYMBOL
PARAMETER
typ.
UNIT
VCC
(V)
VEE
(V)
Vis(p-p)
(V)
CONDITIONS
sine-wave distortion
f = 1 kHz
0.04
0.02
%
%
2.25
4.5
−2.25
−4.5
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
sine-wave distortion
f = 10 kHz
0.12
0.06
%
%
2.25
4.5
−2.25
−4.5
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
switch “OFF” signal
feed-through
−50
−50
dB
dB
2.25
4.5
−2.25
−4.5
note 1
RL = 600 Ω; CL = 50 pF
f = 1 MHz see (Fig.12 and 15)
crosstalk between
any two switches/
multiplexers
−60
−60
dB
dB
2.25
4.5
−2.25
−4.5
note 1
RL = 600 Ω; CL = 50 pF;
f = 1 MHz (see Fig.16)
V(p−p)
crosstalk voltage between
control and any switch
(peak-to-peak value)
110
220
mV
mV
4.5
4.5
0
−4.5
fmax
minimum frequency response
(−3dB)
160
170
MHz
MHz
2.25
4.5
−2.25
−4.5
CS
maximum switch capacitance
independent (Y)
common
(Z)
5
8
pF
pF
RL = 600 kΩ; CL = 50 pF;
f = 1 MHz (E or Sn,
square-wave between VCC
and GND, tr = tf = 6 ns
(see Fig.17)
note 2
RL = 50 Ω ; CL = 10 pF
(see Fig.13 and 14)
Notes to the AC characteristics
1. Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage Vis to 0 dBm level at VOS for 1 MHz (0 dBm = 1 mW into 50 Ω).
General note
Vis is the input voltage at an nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at an nYn or nZ terminal, whichever is assigned as an output
December 1990
12
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE = −4.5 V;
RL = 50 Ω; Rsource = 1 kΩ.
Fig.12 Typical switch “OFF” signal feed-through as a function of frequency.
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE = −4.5 V;
RL = 50 Ω; Rsource = 1 kΩ.
Fig.13 Typical frequency response.
Fig.14 Test circuit for measuring sine-wave
distortion and minimum frequency
response.
December 1990
Fig.15 Test circuit for measuring switch “OFF”
signal feed-through.
13
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
(a) channel ON condition
(b) channel OFF condition
Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers.
The crosstalk is defined as follows
(oscilloscope output):
Fig.17 Test circuit for measuring crosstalk between control and any switch.
December 1990
14
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
AC WAVEFORMS
Fig.18 Waveforms showing the input (Vis) to output (Vos) propagation delays.
(1) HC : VM = 50%; VI = GND to VCC.
HCT: VM = 1.3 VI = GND to 3 V.
Fig.19 Waveforms showing the turn-ON and turn-OFF times.
December 1990
15
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
TEST CIRCUIT AND WAVEFORMS
Conditions
TEST
SWITCH
VIS
tPZH
tPZL
tPHZ
tPLZ
others
VEE
VCC
VEE
VCC
open
VCC
VEE
VCC
VEE
pulse
tr; tf
FAMILY
AMPLITUDE
VM
fmax;
PULSE WIDTH
OTHER
74HC
VCC
50%
<2 ns
6 ns
74HCT
3.0 V
1.3 V <2 ns
6 ns
CL = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT = termination resistance should be equal to the output impedance ZO of the pulse generator.
tr = tf = 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
Fig.20 Test circuit for measuring AC performance.
Conditions
TEST
SWITCH
VIS
tPZH
tPZL
tPHZ
tPLZ
others
VEE
VCC
VEE
VCC
open
VCC
VEE
VCC
VEE
pulse
tr; tf
FAMILY
AMPLITUDE
VM
OTHER
74HC
VCC
50%
<2 ns
6 ns
74HCT
3.0 V
1.3 V <2 ns
6 ns
CL = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT = termination resistance should be equal to the output impedance ZO of the pulse generator.
tr = tf = 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
Fig.21 Input pulse definitions.
December 1990
fmax;
PULSE WIDTH
16
Philips Semiconductors
Product specification
Triple 2-channel analog
multiplexer/demultiplexer
74HC/HCT4053
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
December 1990
17