Lighting | Imaging | Telecom p Pyroelectric Infrared Detectors Four elements as two pairs Two outputs, inverse polarity Designed for PIR Alarm Systems The LHi 1548 pyroelectric infrared detector is designed for high end PIR alarm applications. It includes a twin type pyroelectric ceramic with 4 sensitive elements connected to two FET source follower circuits.Thus it provides for dual channel output . The channels are of inverse polarity. The LHi 1548 detector is available in TO-5 housing with standard infrared filter. It offers excellent common mode performance (match) and low noise Parameters min typical Element size R esponsivity 4200 Right for modification reserved / WS /, 29.6.2001 mm2 (4 elements) 5000 V /W 100°C, 1 Hz Noise 30 75 µV pp 25°C , 0,3...10Hz 1,55 V RS =47kW , 25°C W Ö Hz 1Hz Bw, 100°C, 1 Hz 0,2 8,6x10-10 28x10-10 3,5x10 7 11x10 5 2 Operating Voltage Field of View, horizontal vertical cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 7 10 kW RS =47kW , 25°C 15 V RS =47kW , 25°C 103° unobstructed 96° unobstructed Operating Temp. -40 85 °C non permanent S torage Temperature -40 85 °C non permanent 100 R [kV/W] 10 1 10 f [Hz] Dimensions in mm Frequency Response Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 0,953 % Output Impedance 1 condition 15 D* 0,1 units 1 NEP 0,1 0,01 ma x Match Offset Voltage Field of view 1548 LHi USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Santa Clara, CA 95054 Phone +408 565 0830 Fax +408 565 0703 Asia: PerkinElmer Optoelectronics 47, Ayer Rajah Crescent #06-12 Singapore 139947 Phone +65 775 2022 Fax +65 775 1008 www.perkinelmer.com/opto D A T A S H E E T Twin Element Detector LHi 1548