Lighting | Imaging | Telecom p Thermopile Infrared Detectors Array Module TP AM 166 L3.9 TPAM Thermopile Matrix Array with 4x4 Elements Integrated Optics, Multiplexer, Amplifier, Reference and Self Test Function Designed for Industrial Temperature Measurements The integrated ThermoPile Array Sensor consists of a 4x4-elements thermopile chip connected to a multiplexing signal conditioning circuit. The sensor is further equipped with an internal temperature sensor for correct target temperature determination. All analogue signals, including the ambient temperature, are given out in a fixed frame, containing the information in one serial stream. Lenses for different field of views are available on demand. The sensor in a TO-5 housing is mounted on a small pcb with calibration data for this specific sensor stored in an E²PROM. Parameters TPAM 166L3.9 typical Field of view Output voltage Output noise Right for modification reserved / WS /, 21.5.2001 Object temperature 3 3 3 3 3 3 3 3 3 3 100 °C V DD/2 V Output resistance 200 W Power up time 0,3 s 3 kHz S torage temperature -40 100 °C Operating temperature -20 100 °C Temperature ref slope S T 10 mV /K Temperature ref offset VO 0 mV 3 Dimensions in mm Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 0.5...20Hz 500K BB 5...14µm &+, 3 mV /Ö Hz mA $287 3 0.4 1 &+, 3 TBB=80°, Tamb=20° Operating current 6$03/( 3L[HO3LVEHLQJSURFHVVHG V 500K BB 5...14µm 3 6$03/( 0.95 V Output sequence 3 f/1, f = 3.9mm 5 5(6(7 7DPE ° Operating voltageVDD S ample frequency 9UHI condition 41 x 32 -20 Zero signal offset Vref $287 units USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Santa Clara, CA 95054 Phone +408 565 0830 Fax +408 565 0703 Asia: PerkinElmer Optoelectronics 47, Ayer Rajah Crescent #06-12 Singapore 139947 Phone +65 775 2022 Fax +65 775 1008 www.perkinelmer.com/opto V Temp=S TTamb/K +V 0 D A T A S H E E T Plug-In Module with Stored Calibration Data