POINN TISP4082

TISP4082
SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
Copyright © 1997, Power Innovations Limited, UK
APRIL 1987 - REVISED SEPTEMBER 1997
TELECOMMUNICATION SYSTEM SECONDARY PROTECTION
●
Ion-Implanted Breakdown Region
Precise and Stable Voltage
Low Voltage Overshoot under Surge
DEVICE
‘4082
●
●
V(BO)
V
V
58
82
Planar Passivated Junctions
Low Off-State Current < 10 µA
A(T)
1
B(R)
2
Pin 1 is in electrical contact with the mounting base.
MD4XAB
Rated for International Surge Wave Shapes
WAVE SHAPE
STANDARD
8/20 µs
ANSI C62.41
ITSP
A
150
10/160 µs
FCC Part 68
60
10/560 µs
FCC Part 68
45
0.2/310 µs
RLM 88
38
FTZ R12
50
10/700 µs
VDE 0433
50
CCITT IX K17/K20
50
REA PE-60
40
10/1000 µs
●
V(Z)
DO-220 PACKAGE
(TOP VIEW)
device symbol
UL Recognized, E132482
description
The TISP4082 is designed specifically for
telephone equipment protection against lightning
and transients induced by a.c. power lines.
These devices consist of a bidirectional
suppressor element connecting the A and B
terminals. They will suppress inter-wire voltage
transients.
Transients are initially clipped by zener action
until the voltage rises to the breakover level,
which causes the device to crowbar. The high
crowbar holding current prevents d.c. latchup as
the transient subsides.
PRODUCT
These monolithic protection devices are
fabricated in ion-implanted planar structures to
ensure precise and matched breakover control
and are virtually transparent to the system in
normal operation.
INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1
TISP4082
SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
APRIL 1987 - REVISED SEPTEMBER 1997
absolute maximum ratings at 25°C case temperature (unless otherwise noted)
RATING
SYMBOL
VALUE
UNIT
Non-repetitive peak on-state pulse current (see Notes 1, 2 and 3)
8/20 µs (ANSI C62.41, open-circuit voltage wave shape 1.2/50 µs)
150
10/160 µs (FCC Part 68, open-circuit voltage wave shape 10/160 µs)
60
5/200 µs (VDE 0433, open-circuit voltage wave shape 2 kV, 10/700 µs)
0.2/310 µs (RLM 88, open-circuit voltage wave shape 1.5 kV, 0.5/700 µs)
50
ITSP
A
38
5/310 µs (CCITT IX K17/K20, open-circuit voltage wave shape 2 kV, 10/700 µs)
50
5/310 µs (FTZ R12, open-circuit voltage wave shape 2 kV, 10/700 µs)
50
10/560 µs (FCC Part 68, open-circuit voltage wave shape 10/560 µs)
45
10/1000 µs (REA PE-60, open-circuit voltage wave shape 10/1000 µs)
40
Non-repetitive peak on-state current, 50 Hz, 2.5 s (see Notes 1 and 2)
ITSM
10
A rms
Initial rate of rise of on-state current,
diT/dt
250
A/µs
TJ
150
°C
0 to 70
°C
Linear current ramp, Maximum ramp value < 38 A
Junction temperature
Operating free - air temperature range
Storage temperature range
Tstg
-40 to +150
°C
Lead temperature 1.5 mm from case for 10 s
Tlead
260
°C
NOTES: 1. Above 70°C, derate linearly to zero at 150°C case temperature
2. This value applies when the initial case temperature is at (or below) 70°C. The surge may be repeated after the device has
returned to thermal equilibrium.
3. Most PTT’s quote an unloaded voltage waveform. In operation the TISP essentially shorts the generator output. The resulting
loaded current waveform is specified.
.
electrical characteristics, TJ = 25°C
PARAMETER
VZ
∝
VZ
TEST CONDITIONS
Reference zener
IZ = ± 1mA
voltage
Temperature coefficient
Breakover voltage
(see Notes 4 and 5)
I(BO)
Breakover current
(see Note 4)
VTM
Peak on-state voltage
IT = ± 5 A
Holding current
(see Note 4)
dv/dt
ID
Coff
off-state voltage
Off-state leakage
current
Off-state capacitance
MAX
%/oC
± 82
± 0.15
± 2.2
(see Notes 4 and 5)
UNIT
V
0.1
of reference voltage
Critical rate of rise of
TYP
± 58
V(BO)
IH
MIN
V
± 0.6
A
± 3
V
± 150
mA
(see Note 6)
± 5
kV/µs
VD = ± 50 V
± 10
µA
200
pF
VD = 0
f = 1 kHz
110
NOTES: 4. These parameters must be measured using pulse techniques, tw = 100 µs, duty cycle ≤ 2%.
5. These parameters are measured with voltage sensing contacts seperate from the current carrying contacts located within 3.2 mm
(0.125 inch) from the device body.
6. Linear rate of rise, maximum voltage limited to 80 % VZ (minimum).
.
thermal characteristics
PARAMETER
RθJA
Junction to free air thermal resistance
PRODUCT
2
INFORMATION
MIN
TYP
MAX
UNIT
62.5
°C/W
TISP4082
SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
APRIL 1987 - REVISED SEPTEMBER 1997
PARAMETER MEASUREMENT INFORMATION
Figure 1. VOLTAGE-CURRENT CHARACTERISTIC TERMINALS A AND B
PRODUCT
INFORMATION
3
TISP4082
SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
APRIL 1987 - REVISED SEPTEMBER 1997
MECHANICAL DATA
DO-220
2-pin plastic flange-mount package
This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
DO-220
4,70
4,20
ø
10,4
10,0
3,96
3,71
1,32
1,23
2,95
2,54
see Note B
6,6
6,0
15,90
14,55
see Note A
6,1
3,5
see Note C
1,70
1,07
0,97
0,61
1
14,1
12,7
2
0,64
0,41
5,28
4,68
VERSION 1
2,90
2,40
VERSION 2
ALL LINEAR DIMENSIONS IN MILLIMETERS
NOTES: A. Tie bar short stand off height according to package version.
Version 1, pin 1 is in electrical contact with the mounting tab via tie bar short - stand off height : 2,0 mm maximum.
Version 2, pin 1 is in electrical contact with the mounting tab (no external tie bar short).
B. Mounting tab corner profile according to package version.
C. Typical fixing hole centre stand off height according to package version.
Version 1, 18,0 mm. Version 2, 17,6 mm.
PRODUCT
4
INFORMATION
TISP4082
SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
APRIL 1987 - REVISED SEPTEMBER 1997
IMPORTANT NOTICE
Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any
semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the
information being relied on is current.
PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI
deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except as mandated by government requirements.
PI accepts no liability for applications assistance, customer product design, software performance, or infringement
of patents or services described herein. Nor is any license, either express or implied, granted under any patent
right, copyright, design right, or other intellectual property right of PI covering or relating to any combination,
machine, or process in which such semiconductor products or services might be or are used.
PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE
SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS.
Copyright © 1997, Power Innovations Limited
PRODUCT
INFORMATION
5