CE420860 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three-Phase SCR/Diode Bridge Modules 60 Amperes/800 Volts Description: Powerex Three-Phase SCR/Diode Bridge Modules are designed for use in applications requiring variable DC Voltage control from AC mains. The modules are isolated for easy mounting with other components on common heatsinks. N - M5 THD. (5 TYP.) F M - DIA. (4 TYP.) KT GT KS GS KR GR R J S C D P J T N C B Features: A M Isolated Mounting .110 TAB K E H M Glass Passivated Chips M di/dt = 500V/msec M Metal Baseplate L P KR CE420860 Three-Phase SCR/Diode Bridge Modules 60 Amperes/800 Volts KS GR KT GS R GT S T N M Low Thermal Impedance M Quick Connect Signal Terminals Applications: M Battery Supplies Outline Drawing Dimension A B C D Inches 3.386 2.913±0.012 2.441 1.772±0.008 M AC and DC Motor Control Millimeters 86 74±0.3 62 45±0.2 E 1.220 31 F 1.122 28.5 G 1.063 27 H 0.866 22 J 0.787 20 K 0.276 7 0.236 6 L M N M Furnace Control Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: CE420860 is a 800 Volt, 60 Ampere Three-Phase SCR/Diode Bridge Module. Type CE42 Voltage Volts (x100) Current Rating Amperes (60) 08 60 0.217±0.008 Dia. 5.5±0.2 Dia. M5 Metric M5 SD-49 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CE420860 Three-Phase SCR/Diode Bridge Modules 60 Amperes/800 Volts Absolute Maximum Ratings Characteristics Symbol Peak Forward Blocking Voltage VDRM VDSM Transient Peak Forward Blocking Voltage (Non-Repetitive), t < 5ms DC Forward Blocking Voltage Units 800 Volts 960 Volts 640 Volts 800 Volts VRSM VR(DC) IO 960 Volts 640 Volts 60 Amperes ITSM, IFSM ITSM, IFSM I2t 500 Amperes 460 Amperes 1050 A2sec Critical Rate-of-Rise of On-State Current* di/dt 100 Amperes/ms Peak Gate Power Dissipation PGM Peak Reverse Blocking Voltage Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage DC Output Current, TC = 80°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) I2t (for Fusing), 8.3 milliseconds Average Gate Power Dissipation Peak Forward Gate Voltage Peak Reverse Gate Voltage Peak Forward Gate Current Storage Temperature Operating Temperature VD(DC) VRRM CE420860 PG(AV) VGFM VGRM IGFM TSTG Tj 5.0 Watts 0.5 Watts 10 Volts 5.0 Volts 2.0 Amperes -40 to 125 °C -40 to 125 °C Maximum Mounting Torque M5 Mounting Screw — 17 in.-lb. Maximum Mounting Torque M5 Terminal Screw — 17 in.-lb. 310 Grams Module Weight (Typical) V Isolation *Tj = 125°C, IG = 0.5A, VD = 1/2 VDRM SD-50 — VRMS 2000 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CE420860 Three-Phase SCR/Diode Bridge Modules 60 Amperes/800 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions IDRM IRRM Tj = 125°C, VDRM = Rated 4.0 mA Tj = 125°C, VRRM = Rated 4.0 mA Conducting State Maximums Peak On-State Voltage VFM IFM = 75A, ITM = 75A 1.4 Volts Switching Minimums Critical Rate-of-Rise of Off-State Voltage dv/dt Tj = 125°C, VD = 2/3 VDRM Ru(J-C) Ru(C-S) Per Module 1.5 °C/Watt Per Module 0.06 °C/Watt Blocking State Maximums Forward Leakage Current, Peak Reverse Leakage Current, Peak Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Gate Parameters Maximums Gate Current-to-Trigger Gate Voltage-to-Trigger Non-Triggering Gate Voltage IGT VGT VGDM VD = 6V, RL = 2Ω VD = 6V, RL = 2Ω Tj = 125°C, VD = 1/2 VDRM CE420860 500 50 Units Volts/ms mA 2.0 Volts 0.25 Volts SD-51 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CE420860 Three-Phase SCR/Diode Bridge Modules 60 Amperes/800 Volts MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, ITSM, (AMPERES) 2.0 1.5 1.0 0.5 400 300 200 100 0 101 102 103 100 101 102 INSTANTANEOUS ON-STATE CURRENT, ITM, (AMPERES) CYCLES AT 60 HZ MAXIMUM ALLOWABLE CASE TEMPERATURE (THREE PHASE BRIDGE CONNECTION) MAXIMUM ON-STATE POWER DISSIPATION (THREE PHASE BRIDGE CONNECTION) 140 u 360o 120 RESISTIVE, INDUCTIVE LOAD 100 80 u = 30o 60o 90o 120o 60 0 10 20 30 40 50 60 70 DC OUTPUT CURRENT, IO, (AMPERES) SD-52 TRANSIENT THERMAL IMPEDANCE, Zu(J-C)(t), (oC/WATT) 500 Tj = 125oC 80 MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) INSTANTANEOUS ON-STATE VOLTAGE, VTM, (VOLTS) 2.5 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION-TO-CASE) 101 MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT MAXIMUM ON-STATE CHARACTERISTICS 90o 120o 60o u = 30o 100 u 360o 50 RESISTIVE, INDUCTIVE LOAD 0 0 10 20 30 40 50 2.0 1.5 1.0 0.5 0 10-3 10-2 10-1 TIME, t, (SECONDS) 200 150 100 60 70 DC OUTPUT CURRENT, IO, (AMPERES) 80 100