RM20TPM-24 RM20TPM-2H Tentative Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three-Phase Diode Bridge Modules 40 Amperes/1200-1600 Volts A D J L P - DIA. (2 TYP.) G C Q - M4 THD. (5 TYP.) M K H H B E RM20TPM-24, RM20TPM-2H Three-Phase Diode Bridge Modules 40 Amperes/1200-1600 Volts F Description: Powerex Three-Phase Diode Bridge Modules are designed for use in applications requiring rectification of three-phase AC lines into DC voltage. Each module consists of six diodes and the interconnect required to form a complete threephase bridge circuit. Each diode is electrically insulated from the mounting baseplate for easy mounting on a common heatsink with other components. Features: N M Isolated Mounting M Metal Baseplate M Low Thermal Impedance Applications: M Motor Control Outline Drawing Dimension A B Inches 2.76 2.244±0.010 M Inverters Millimeters 70 57±0.25 C 1.57 40 D 1.10 28 E 0.94 24 F 0.87 22 G 0.79 20 H 0.59 15 J 0.57 14.5 K 0.53 13.5 L 0.39 10 M 0.31 8 N 0.20 M UPS Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: RM20TPM-2H is a 1600 Volt, 40 Ampere ThreePhase Diode Bridge Module. Type Current Rating Amperes (x2) Voltage Volts RM RM 20 20 24 (1200) 2H (1600) 5 P 0.18 Dia. Dia. 4.5 Q Metric M4 M4 D-69 Tentative Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 RM20TPM-24, RM20TPM-2H Three-Phase Diode Bridge Modules 40 Amperes/1200-1600 Volts Absolute Maximum Ratings Characteristics Symbol RM20TPM-24 RM20TPM-2H Units Peak Reverse Blocking Voltage VRRM VRSM 1200 1600 Volts 1350 1700 Volts EA IF(DC) IFSM 370 440 40 40 Amperes 400 400 Amperes I2t 670 670 A2sec Peak Reverse Blocking Voltage (Non-Repetitive) Recommended AC Input Voltage DC Output Current Peak Half-Cycle Surge (Non-Repetitive) On-State Current (60Hz) I2t (for Fusing), 8.3 milliseconds Junction Temperature Maximum Mounting Torque M4 Mounting Screw Tj TSTG — Maximum Mounting Torque M4 Terminal Screw — Storage Temperature Module Weight (Typical) -40 to 125 -40 to 125 °C -40 to 150 -40 to 125 °C — V Isolation Volts VRMS 15 15 kg.-cm. 15 15 kg.-cm. 100 100 Grams 2500 2500 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions RM20TPM-24/RM20TPM-H Units Blocking State Maximums Reverse Leakage Current, Peak IRRM Tj = 150°C, VRRM = Rated 10 mA Conducting State Maximums Peak On-State Voltage VFM Tj = 25°C, IFM = 40A Ru(J-C) Ru(C-S) Per Module 0.35 °C/Watt Per Module 0.09 °C/Watt Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) D-70 1.3 Volts