(888) IPD-CONVerters ● (888) 473-2668 ● www.ipdconverters.com DRD SERIES - DUAL OUTPUT, 2 WATT DESCRIPTION FEATURES DRD dual output DC/DC converters offer excellent regulation and isolation in an industry standard package. Available in several input versions, the DRD is perfect for industrial, datacom, or telecom applications. The DRD features short circuit protection and 500 VDC isolation. Please see the DRS series for single output applications. • Industry Standard Package • Industry Standard Pinout • 85°C Case Operation • Short Circuit Protection • 5V, 12V, 24V, 28V, • • • • and 48V Inputs Input Pi Filter 6-Sided Shielding Regulated Outputs 500V Isolation Selection Chart DRD512 Input Range VDC 4.65 - 5.50 ±12 ±0.080 DRD515 4.65 - 5.50 ±15 ±0.065 DRD1212 10.90 - 13.2 ±12 ±0.080 DRD1215 10.90 - 13.2 ±15 ±0.065 DRD2412 21.60 - 26.40 ±12 ±0.080 DRD2415 21.60 - 26.40 ±15 ±0.065 DRD2812 25.20 - 30.80 ±12 ±0.080 DRD2815 25.20 - 30.80 ±15 ±0.065 DRD4812 43.20 - 52.80 ±12 ±0.080 DRD4815 43.20 - 52.80 ±15 ±0.065 Model Output VDC Output Current 2.00” (50.8mm) 0.40” (10.2mm) Note: For model options, see the last page of this file. 1 1.00” (25.4mm) OPTIONS When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Terminal Strip TS REMARKS TTL “Low” Turns Module ON TTL “High” Turns Module OFF XWS, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 2