PC 2004-C-PI OUTLINE DIMENSION & BLOCK DIAGRAM 93.0 0.5 70.0 18.0 1.8 16- 1.0 1 H2 9.5 2.5 P2.54 x 15=38.1 H1 4- 4.0 16 4- 1.0 32.6 22.0 17.56 15.0 40.0 47.0 0.5 K 16.0 23.5 A 1.6 3.5 55.12 60.0 76.2 4.4 46.5 COM 16 LCD PANEL LCD CONTROLLER LSI E R/W RS Vss Vdd Vo SEG 40 SEG 160 CONTROL SIGNALS 4 A K SEGMENT DRIVER 4.51 4.03 0.46 0.05 DB7 DB0 2.78 2.3 0.42 0.05 BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 93.0 x 47.0 60.0 x 22.0 0.42 x 0.46 0.47 x 0.51 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol Vss Vdd Vo RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 A K H2 / H1 5.0 / 9.6 5.0 / 9.6 7.8 / 11.5 Function Power supply(GND) Power supply(+) Contrast Adjust Register select signal Data read / write Enable signal Data bus line Data bus line Data bus line Data bus line Data bus line Data bus line Data bus line Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Data bus line Power supply for LED B/L (+) Power supply for LED B/L ( ) LCM current consumption (No B/L) Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Max. Units V 7 13 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units Power supply vlotage Vdd-Vss 25oC V 5.5 2.7 Top N W N W N W V 8.2 V -20oC 7.4 7.8 LCD operation voltage Backlight current consumption Vop Idd LED/edge LED/array 0oC V V 50oC 4.7 4.1 4.4 V 70oC 6.6 V 6 6.3 2.5 4 Vdd=5V mA 20 VB/L=3.3V mA VB/L=4.2V mA 25oC 4.9 5.2 5.5 4.5 6.4 4.8 6.7 5.1 7 LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.