PG 9832-A OUTLINE DIMENSION & BLOCK DIAGRAM 26.0 H1 46.0 H2 22.0 15.64 98 x 32 Dots 7.9 20 2 19 4.0 2.0 1 (P2.54 x 9) 22.86 44.0 52.0 0.5 14.57 4.0 DB0~DB7 CS1 /WR(R/W) Ao CL Vss Vdd Vee(Vo) /RD(E) RES CS2 18.5 4- 2.5 28.2 44.0 0.5 36.0 2.54 43.08 LCD DRIVER 1 1.6 20- 1.0 PAD20- 1.8 COM 16 LCD PANEL COM 16 SEG 61 SEG 37 0.04 LCD DRIVER 2 A K 0.45 0.4 0.04 BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 52.0 x 44.0 46.0 x 18.5 0.40 x 0.45 0.44 x 0.459 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. 1 2 3 4 5 6 7 8 9 10-17 18 19 20 Symbol Vss Vdd Vee(Vo) A0 CS1 CS2 CL E R/W DB0-DB7 RES A K Function Power supply(GND) Power supply(+) Contrast Adjust Command / Data select Chip select driver 1 Chip select driver 2 External clock input Enable signal Data read /weite Data bus line Reset Power supply for LED B/L (+) Power supply for LED B/L ( ) H2 / H1 5.1 / 9.20 / 8.9 / 13.0 Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Max. Units V 8.0 16.5 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units 5.5 2.7 Power supply voltage Vdd-Vss 25oC V Top N W N W N W V -20oC 6.7 V 6.1 6.4 LCD operation voltage Vop 0oC 25oC 6 6.3 50oC 70oC LCM current consumption (No B/L) Backlight current consumption Idd 5.8 Vdd=5V 6.1 1.0 LED/edge VB/L=4.2V LED/array VB/L=4.2V LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request. 120 V V V 6.4 V 2.5 mA mA mA 6.6