PE160160-001 …….OUTLINE DIMENSION & BLOCK DIAGRAM MECHNICAL SPECIFICATION (The tolerance unless classified ±0.1mm) Overall Size View Area Dot Size Dot Pitch 83.20 x 83.50 mm 61.0 x 61.0 mm 0.335 x 0.335 mm 0.35 x 0.35 mm Module W/O B/L EL B/L LED B/L PIN ASSIGNMENT Pin No. Symbol 1~3 V0R, V12R, V43R VSS 4 MD 5 FR 6 EI01 7 LP 8 DISPOFF 9 XCK 10 11~18 DI7~DI0 EIO2 19 S/C 20 VDD 21 L/R 22 V SS 23 24~26 V43L,V12L,V0L Function Bias power supply for LCD drive voltage Ground Mode selection AC signal input for LCD drive waveform Input/output for chip selection Latch pulse input for display data Control input for output of non-select Clock input for taking display data Display data input Input/output selection Segment/common mode selection Logic power supply Input selection to reading direction Ground Bias power supply for LCD drive voltage REMARK LCD option: STN, FSTN, FFSTN Backlight Option: EL H2 / H1 - / 1.90 -/-/- ABSOLUTE MAXIMUM RATING Item Supply for logic voltage LCD driving supply voltage Input Voltage Symbol VDD-VSS VDD-V5 VIN Condition 25°C 25°C 25°C Min. -0.3 -0.3 -0.3 Max. Units 7.0 V +30.0 V VDD+0.3 V ELECTRICAL CHARACTERISTICS Item Power supply voltage LCD operation voltage LCM current consumption (No B/L) Backlight current consumption Symbol Condition Min. VDD-VSS 25°C 2.7 TOP N W -20°C 0°C VOP 25°C 50°C 70°C IDD VDD=3.0V IEE VOP=19.0V - Typical 3.0 N W Max. Units 5.5 V N W V V V - 19.0 V V V 0.1 mA 4.0 mA -mA