PG 320240-D OUTLINE DIMENSION & BLOCK DIAGRAM 74.04 190 10.0 CCFL 7.11 4.02 9.53 6.63 H1 H2 (8.0) 148.02 0.5 136.2 120.14(V/A) 115.17(A/A) 4.44 (P2.54 x 2) 5.08 120.24 0.5 112.2 105.4 92.14(V/A) 86.37(A/A) 0.03 0.33 59.81 0.33 0.03 320 x 240 Dots 1.6 HOLE20- 1.0 PAD20- 1.4 139.98 HLOE4- 3.5 /WR /RD Ao /CS /RES DB0~DB7 9 4 CONTROLLER SED 1335 COM COM 3 3 COM Vss Vdd (TEST POINT) Vee VLCD 8 32K RAM 2 CRYSTAL 21.06 4.02 LCD PANEL 80 9 NEGATIVE VOLTAGE / TEMP. COMPENSATION (P2.54 x 9) 22.86 80 80 80 80 80 80 COL COL COL COL 15 8 1 2.54 5.0 2 20 19 (17.43) 86.0 Molex 50-57-9403 8 8 8 TO COM, COL, LSI BIAS A K 8 BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 148.02 x 120.24 120.14 x 92.14 0.33 x 0.33 0.36 x 0.36 PIN ASSIGNMENT Pin no. Symbol Vss 1 2 Vdd 3 VLCD 4 RD 5 WR Ao 6 7~14 DB0~DB7 15 CS 16 RST 17 Vee 18 FG NC 19/20 Function Power supply(GND) Power supply(+) No connection(VLCD test point) Data Read Data Write Command / Data select Data bus line Chip select Reset No connection(VLCDtest point) Frame Ground No Connection Module W /O B/L EL B/L LED CCFL B/L H2 / H1 / / 10.5 / 20.3 ABSOLUTE MAXIMUM RATING Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 0 -0.3 Max. Units V 7.0 35.0 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units 4.5 V Power supply voltage Vdd-Vss 25oC 5.5 Top N W N W N W V -20oC V LCD operation voltage Vop 0oC 26.4 25oC 24.8 50oC 24.2 70oC LCM current consumption (No B/L) Backlight current consumption Idd Vdd=5V 50 LED/edge VB/L=4.2V 200 LED/white VB/L=3.5V 160 LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request. V V V V mA mA mA