PG 12032-D OUTLINE DIMENSION & BLOCK DIAGRAM 34.05 68.1 0.5 H1 62.0 H2 56.35 PCB IC SIDE 20.75 22.5 32.9 17.78 (P2.54 x 7) 20.78 16- 0.8 PAD16- 1.6 1 16 2 1 16 15 1.0 2.54 0.64 2 1 15 1.73 6.0 16 3.0 P1.27 x 15=19.05 16.45 120 x 32 Dots 1.0 (LED B/L) DB7 LCD DRIVER 1 DB0 E1 R/W A0 Vo Vcc GND COM 16 LCD PANEL COM 16 0.42 0.05 SEG 60 0.05 0.60 LCD DRIVER 2 E2 SEG 60 A K BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 68.1 x 38.6 66.0 x 22.5 0.42 x 0.60 0.47 x 0.65 PIN ASSIGNMENT Pin no. Symbol 1 2 GND Vdd Function Power supply (GND) Power supply(+) 3 Vo Contrast Adjust 4 A0 Command data input 5 R/W Data read / write 6 7 8 E1 Enable driver 1 E2 NC Enable driver 2 No connection 9~16 DB0~DB7 Data bus line Module W /O B/L EL B/L LED B/L H2 / H1 3.7 / 6.2 5.1 / 7.6 / ABSOLUTE MAXIMUM RATING Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Min. -0.3 -0.3 -0.3 Item Supply for logic voltage Max. Units V 8.0 16.5 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Power supply voltage Symbol Condition Vdd-Vss 25oC Top Min. Typical 2.7 N W N W -20oC LCD operation voltage LCM current consumption (No B/L) Backlight current consumption Vop Idd LED/edge LED/array 0oC 5.6 6 Max. Units 5.5 V N W V 6.3 V V V 50oC 5.5 4.7 5.1 V 70oC 5.9 V 5.3 5.6 1.0 2.5 Vdd=5V mA VB/L=4.2V 100 mA VB/L=4.2V mA 25oC 5.3 5.7 6.1 5.0 5.6 5.4 5.9 5.8 6.2 LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.