Series 517 / 614 Pin grid array sockets and carrier with interstitial contact rows Solder tail 82 Pin grid array sockets with interstitial contact rows These sockets of a very compact design have interstitial contact rows with a staggered contact arrangement and row distances of 1.27 mm. Their contact density is nearly double as compared to PGAs based on a standard 2.54 mm grid pattern They are equipped with machined precision contacts with extrasoft contact clips assuring low insertion/withdrawal forces Insertion characteristics: 6-finger very low Platings 91 93 97 Sleeve 5 µm Sn 5 µm Sn 5 µm Sn Clip 0.25 µm Au 0.75 µm Au Goldflash Pin Ordering information Replace xxx-xx-xxx with number of poles, body size and layout numbers as indicated on pages 91 and 92. For example, a 18×18 pin configuration with 17×17 interstitial rows and standard soldering tails becomes: 517-93-391-18-101111 Options: For other sizes and layouts please consult 517-91-xxx-xx-xxx-111 517-93-xxx-xx-xxx-111 517-97-xxx-xx-xxx-111 B PGA sockets with interstitial rows and standard solder tails, length 3.2 mm 517-91-xxx-xx-xxx-111 B 517-93-xxx-xx-xxx-111 B 517-97-xxx-xx-xxx-111 B Interstitial PGA socket with standard solder tails and 4 elevating contacts located at the corners for better soldering and cleaning Add 50 to the fourth group of figures in standard reference number, e.g. 517-93-391-18-101111 becomes 517-93-391-68-101111 614-91-xxx-xx-xxx-144 B 614-93-xxx-xx-xxx-144 B 614-97-xxx-xx-xxx-144 B PGA carrier socket with disposable plastic body and carrier pins. Low profile ultra thin contacts are plugged-on Solder terminations ∅ 0.88 mm total length of contact 3.9 mm Requires ∅ min. 0.9 mm holes in PCB B Products not available from stock. Please consult PRECI-DIP.