PLT Vishay Thin Film Precision Low TCR Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.01 % Tolerance FEATURES • TCR of ± 5 ppm/°C standard • Tolerances to ± 0.01 % • Anti corrosion resistant film with (SPM) special passivation method • Stable film and performance characteristics (R ± 0.04 % at 70 °C, 10 000 h) • Non-standard resistance values available • Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V) • UL 94 V-0 flame resistant • Compliant to RoHS directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition Actual Size 0603 Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for precision applications requiring low noise, stability, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. TYPICAL PERFORMANCE CONSTRUCTION SPM Passivation Enhancement ABSOLUTE Passivated Nichrome Resistive Film Solder Coating TCR 5 TOL. 0.01 Nickel Barrier High Purity Alumina Substrate Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range SPECIFICATIONS CONDITIONS Passivated nichrome - 250 to 100 k - ± 5 ppm/°C - 55 °C to + 125 °C TCR: Absolute Tolerance: Absolute ± 0.1 % to ± 0.01 % + 25 °C R ± 0.02 % 2000 h at 70 °C - - ± 0.1 ppm/V (typical) - Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage 75 V to 200 V - Operating Temperature Range - 55 °C to + 125 °C - Storage Temperature Range - 55 °C to + 150 °C - < - 35 dB (typical) - R ± 0.01 % 1 year at + 25 °C Noise Shelf Life Stability: Absolute COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) WORKING VOLTAGE (V) 0603 150 75 RESISTANCE RANGE () 250 to 40K 0705 250 100 250 to 50K 0805 250 100 250 to 50K 1206 400 200 250 to 100K Note (1) 0705 and 0805 are the same (only use 0805 when ordering) * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60030 Revision: 12-Jan-11 For technical questions, contact: [email protected] www.vishay.com 79 PLT Vishay Thin Film Precision Low TCR Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.01 % Tolerance DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005 0705, 0805 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005 1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 100 k R ± (%) Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.01 0.01 Moisture Resistance 0.02 0.02 High Temperature Exposure 0.02 0.02 Load Life (10 000 h, + 70 °C) 0.04 0.04 ± 5 ppm/°C ± 5 ppm/°C ENVIRONMENTAL TEST TCR 100 Precent of Rated Power 10 k R ± (%) 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION P L T 0 6 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PLT 0603 0805 1206 Z = ± 5 ppm/°C 0 3 Z 1 RESISTANCE TOLERANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. L = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % Example: 1001 = 1 k 2500 = 250 0 0 1 TERMINATION Q B T 1 PACKAGING B = Wraparound Sn/Pb WS = WAFFLE PACK solder w/Ni barrier (63 % Sn/37 % Pb w/ TAPE AND REEL nickel barrier) T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) S = Wraparound T3 = 300 min., 300 mult lead (Pb)-free solder T5 = 500 min., 500 mult 96.5 % Sn/3.0 % Ag/ TF = Full reel 0.5 % Cu TS = 100 min., 1 mult RoHS compliant - e1 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = 982.6 532R41 = 532.41 Note Preferred packaging code (1) www.vishay.com 80 For technical questions, contact: [email protected] Document Number: 60030 Revision: 12-Jan-11 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1