BR1005 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION BR1010 SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes FEATURES * Surge overload rating: 200 amperes peak * Low forward voltage drop BR-10 MECHANICAL DATA * * * * * * UL listed the recognized component directory, file #E94233 Epoxy: Device has UL flammability classification 94V-O Lead: Mil-STD-202E method 208C guaranteed Mounting position: Any Weight: 7.86 grams Mounting: Hole thru for # 6 screw .296 (7.5) .255 (6.5) .042 (1.1) DIA. .039 (1.0) TYP. .75 MIN. (19.1) .770 (19.6) .730 (18.5) HOLE FOR NO. 6 SCREW AC MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. AC .520 (13.2) .480 (12.2) .770 (19.6) .730 (18.5) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .520 (13.2) .480 (12.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage o Maximum Average Forward Tc = 50 C Rectified Output Current at: Tc = 100 oC 10.0 IO Amps 6.0 o T A = 50 C 6.0 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range I FSM 200 TJ -55 to + 125 0 C T STG -55 to + 150 0 C Amps ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 5.0A DC Maximum Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T C = 100 oC VF BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 UNITS 1.1 Volts 10 uAmps 0.2 mAmps IR 2001-5 RATING AND CHARACTERISTIC CURVES ( BR1005 THRU BR1010 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 250 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 10 8 CA SE 6 AM 4 BI 2 Single Phase Half Wave 60Hz Indutive or Resistive Load EN T 0 0 1 2 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz 0 50 100 CASE TEMPERATURE, ( 150 ) FIG. 3- TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS TJ = 25 Pulse Width = 300us 1% Duty Cycle 10 1.0 .1 10 1.0 TJ = 25 .1 .01 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) RECTRON