BR605 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION BR610 SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * Surge overload rating: 125 amperes peak Low forward voltage drop Small size: simple installation Mounting position: Any Mounting: Hole thru for # 6 screw BR-6 MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .270 (6.8) .230 (5.8) .042 (1.1) DIA. .039 (1.0) TYP. .750 MIN. (19.1) .620 (15.7) .580 (14.7) .445 (11.3) .405 (10.3) HOLE FOR NO. 6 SCREW MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. AC Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .445 (11.3) .620 (15.7) .405 (10.3) .580 (14.7) AC Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL BR605 BR61 BR62 BR64 BR66 BR68 BR610 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current at Tc = 75o C Volts IO 6.0 Amps I FSM 125 Amps Typical Thermal Resistance from junction to case R θJC 7.3 Typical Thermal Resistance from junction to ambient RθJA 28 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range 0 C/ W TJ -55 to + 150 0 C T STG -55 to + 150 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL VF Maximum Forward Voltage Drop per element at 3.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T C = 100 o C Note: “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. IR BR605 BR61 BR62 BR64 BR66 BR68 BR610 UNITS 1.0 Volts 5.0 uAmps 0.2 mAmps 2005-3 REV: A RATING AND CHARACTERISTIC CURVES ( BR605 THRU BR610 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 250 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 0 10 8 6 4 60 Hz RESISTIVE OR INDUCTIVE LOAD 2 0 1 2 4 6 8 10 20 40 60 80100 0 50 100 CASE TEMPERATURE, ( NUMBER OF CYCLES AT 60Hz 150 ) FIG. 3- TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS 100 TJ = 25 Pulse Width = 300us 1% Duty Cycle 10 1.0 .1 10 1.0 TJ = 25 .1 .01 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) RECTRON