FR301G RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FAST RECOVERY GLASS PASSIVATED RECTIFIER FR307G VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES * * * * * * High reliability Low leakage Low forward voltage drop High current capability Glass passivated junction High switching capability DO-201AD MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 1.18 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL FR301G FR302G FR303G FR304G FR305G FR306G FR307G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range VDC Volts IO 3.0 Amps I FSM 125 Amps CJ 50 T J , T STG -65 to + 150 pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Average, Full Cycle .375” (9.5mm) lead length at TL = 55oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF FR301G FR302G FR303G FR304G FR305G FR306G FR307G UNITS 1.3 Volts 5.0 uAmps IR 100 trr 150 uAmps 250 500 nSec 1998-8 Back RECTRON