BUL56BSMD NPN FAST SWITCHING TRANSISTOR MECHANICAL DATA Dimensions in mm FEATURES 1 3 • ULTRA FAST TURN–ON AND TURN–OFF SWITCHING (tr / tf = 40ns) 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 3 .6 0 (0 .1 4 2 ) M a x . • LOW SATURATION VOLTAGE 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 2 APPLICATIONS 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) • High frequency and high efficiency converters, switching regulators and motor controls. SMD1 Pad 1 – Base Pad 2 – Collector • High speed TO220 transistor suited for low voltage applications. Pad 3 – Emitter • Ideally suited for 12V and 24V inverters. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage 200V VCEO Collector – Emitter Voltage (IB = 0) 100V VEBO Emitter – Base Voltage (IC = 0) 7V IC Collector Current 14A IB Base Current 4A Ptot Total Dissipation at Tcase = 25°C Derate above 25°C when used on efficient heatsink Tstg Storage Temperature Range Rth Thermal Resistance Junction – Case Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 85W 4.8W/°C –65 to 200°C 175°C / W Prelim. 7/00 BUL56BSMD ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions ELECTRICAL CHARACTERISTICS VCEO(sus)* Collector – Emitter Sustaining Voltage IC = 200mA V(BR)EBO* Emitter – Base Breakdown Voltage ICER* Collector Cut–Off Current ICBO* Collector – Base Cut–Off Current IEBO* Emitter Cut–Off Current VCE(sat)* Collector – Emitter Saturation Voltage VBE(sat)* Base – Emitter Saturation Voltage ton SWITCHING CHARACTERISTICS (resistive load) VCC = 50V Turn–On Time ts Storage Time VBE = –6V tf Fall Time RBB = 2.5W ts tf ts tf Min. Typ. Max. 100 IE = 1mA V 7 IB = 0 VCE = 200V RBE = 50W TC = 125°C IE = 0 VCB = 200V VBE = –1.5V TC = 125°C IC = 0 VEB = 5V IC = 5A IB = 500mA 0.6 IC = 10A IB = 1A 1.5 IC = 10A IB = 1A 2 SWITCHING CHARACTERISTICS (inductive load) Storage Time VCC = 50V Fall Time VBE = –5V Storage Time (Tj = 125°C) LB = 0.5mH Fall Time (Tj = 125°C) 3 mA 1 mA 1 mA 0.2 0.6 IB1 = 1.2A 0.4 1 0.04 0.25 IB1 = 1.2A V V IC = 12A IC = 12A Unit m S m S 0.5 0.04 2 0.15 * Pulse test tp = 300ms , d £ 2% Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Prelim. 7/00