D SERIES SMD VIDEO DELAY LINES • Surface mount compatible • Video performance • Small size, low cost • 50, 75 or 200 ohms This range of SMD delay lines is suitable for automatic placement and reflow, and so do not add the excessive production costs associated with through hole devices. They are designed to delay video bandwidth signal with minimal distortion. The equalised lines allow small delay differences between signals to be matched and give excellent response to pulse and bar test signals. They may also be cascaded to give wider ranges of delay times. Part number Delay time Group delay ripple Impedance DA01A DA02A DA05A DA10A 1 ns 2 ns 5 ns 10 ns < 0.5 ns < 0.5 ns < 1.0 ns < 1.0 ns 50 Ω 50 Ω 50 Ω 50 Ω DB01A DB02A DB05A DB10A 1 ns 2 ns 5 ns 10 ns < 0.5 ns < 0.5 ns < 1.0 ns < 1.0 ns 75 Ω 75 Ω 75 Ω 75 Ω DC01A DC02A DC05A DC10A 1 ns 2 ns 5 ns 10 ns < 0.5 ns < 0.5 ns < 1.0 ns < 1.0 ns 200 Ω 200 Ω 200 Ω 200 Ω Common specifications: Tolerance on delay time at 200 kHz Bandwidth Amplitude ripple Return loss Pulse and bar K-rating(2T) Luma/Chroma Gain Inequality(20T) Luma/Chroma Delay Inequality(20T) Temperature range Aqueous Washable SMD Reflow Limitations as Package ± 2% > 5.5 MHz < 0.1 dB > 27 dB < 0.5% < 1% < 5 ns 0 to 700C Yes Data Sheet Fara309 DR00142A Other delay times and impedances supplied upon request. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA083d.DOC Page 1 of 2 Aug-01(C) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA083d.DOC Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Aug-01(C)