PQ5TS1 series Low Power-Loss Voltage Regulator 0.15A Output, Surface Mount Type Low Power-Loss Voltage Regulators (Built-in Reset Signal Generating Function) Outline Dimensions (Unit:mm) 6.6MAX 5.2±0.5 2.3±0.5 3 5.5±0.5 5TS1A (0 to 0.25) 2.5MIN (1) Built-in reset signal generating function (Available 7 series of reset detection voltage) (2) Low power-loss (Dropout voltage: MAX. 1.2V at Io=0.1A) (3) Surface mount type package (Equivalent to SC-63) (4) High-precision output type (Output voltage precision: ±3.0%) (5) Overcurrent, overheat protection functions 4-(1.27) (0.5) 1 3 2 5 4 Internal connection diagram 1 2 Control Circuit 4 Applications (1) Power supplies for various electronic equipment such as AV, OA. Absolute Maximum Ratings (0.9) 0.5+0.2 -0.1 Features Symbol Parameter *1 Input voltage VIN *1 Reset output applicable voltage Vr Output current IO Reset output current Ir Power dissipation PD Junction temperature Tj *2 Operating temperature Topr Storage temperature Tstg Soldering temperature Tsol (0.5) (1.7) Sharp's PQ5TS1 series are 0.15A output, surface mount type low power-loss voltage regulators with built-in reset signal generating function. They are suitable for malfunction prevention of microcomputers in various electronic equipment such as AV, OA equipment when they are turned-on or they are in error of operation. 9.7MAX General Description 1 DC input(Vin) 2 DC output(Vo) 3 GND 4 Reset output(Vr) 5 NC 3 (Ta=25˚C) Rating Unit 15 V 15 V 0.15 A 5 mA 0.8 W 150 ˚C −20 to +80 ˚C −40 to +150 ˚C 260(For 10s) ˚C *1 All are open except GND and applicable terminals. *2 Overheat protection may operate at 125<=Tj<=150˚C. (Notice) • In the absence of device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. • Specifications are subject to change without notice for improvement. (Internet) • Data for Sharp's optoelectronic/power devices is provided for internet. ( Address http://www.sharp.co.jp/ecg/) Tec.PW961201 PQ5TS1 series Low Power-Loss Voltage Regulator Electrical Characteristics Parameter Output voltage Load regulation Line regulation Ripple rejection Temperature coefficient of output voltage Dropout voltage Quiescent current Low reset output voltage High reset output voltage (Unless otherwise specified, Vin=7V, Io=50mA, Ta=25˚C) Symbol Vo RegL RegI RR TcVo Vi-o Iq Vrl Vrh Conditions − Io=5mA to 150mA Vin=7 to 12V, Io=5mA − Tj=0 to 125˚C *3, Io=0.1A Io=0A Ir=5mA, Io=5mA Io=5mA MIN. 4.85 − − 45 − − − − Vo-0.2 TYP. 5.0 0.1 0.5 55 ±0.02 − − − − (Ta=25˚C) Unit MAX. V 5.15 % 2.0 % 2.5 − dB %/˚C − 1.2 V 10 mA V 0.8 − V *3 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. Reset Threshold Voltage Line-up Parameter Symbol PQ5TS1A PQ5TS1B PQ5TS1C Reset threshold voltage PQ5TS1D PQ5TS1E PQ5TS1F PQ5TS1G Vrt Conditions *4, Io=5mA MIN. 4.55 4.35 4.05 3.75 3.45 3.15 2.95 TYP. 4.7 4.5 4.2 3.9 3.6 3.3 3.1 MAX. 4.85 4.65 4.35 4.05 3.75 3.45 3.25 Unit V *4 Output voltage shall be the value when input voltage lowers and Vr becomes low. Typical Application Reset Output Response Characteristics Vin VIN + VO(+5V) 1 * 2 Rr Cin 4 Specific IC Reset detection voltage + Vr Cr CO Microcomputer Vo RESET 3 Vr * Rr=10kΩ TYP As of December 1996 Tec.PW961201