SHANGHAI SUNRISE ELECTRONICS CO., LTD. SB1620C THRU SB1660C SCHOTTKY BARRIER RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 20 TO 60V CURRENT: 16A FEATURES TO-220 • Epitaxial construction for chip • High current capability • Low forward voltage drop • Low power loss, high efficiency • High surge capability • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Common cathode,Suffix"A"Common anode • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL SB SB SB SB SB SB UNITS 1620C 1630C 1635C 1640C 1650C 1660C 20 30 35 40 50 60 V 14 21 25 28 35 42 V 20 30 35 40 50 60 V VRRM Maximum Repetitive Peak Reverse Voltage VRMS Maximum RMS Voltage VDC Maximum DC Blocking Voltage Maximum Average Forward Rectified Current IF(AV) (TC=95oC) Peak Forward Surge Current (8.3ms single IFSM half sine-wave superimposed on rated load) VF Maximum Forward Voltage (at 8.0A DC) o Maximum DC Reverse Current Ta=25 C IR (at rated DC blocking voltage) Ta=100oC CJ Typical Junction Capacitance (Note 1) R Typical Thermal Resistance (Note 2) θ(ja) TJ Operating Junction Temperature TSTG Storage Temperature Note: 1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2.Thermal resistance from junction to case 3. Suffix "A" common anode 16 A 150 A 0.65 0.75 V mA mA pF 5.0 50.0 700 500 o 3 -65 to +125 -65 to +150 -65 to +150 C/W o C o C http://www.sse-diode.com