SB10150FCT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 150V CURRENT: 10.0A FEATURE ITO-220AB High current capability, Low forward voltage drop Low power loss, high efficiency High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Common Cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SB10150FCT units Maximum Recurrent Peak Reverse Voltage Vrrm 150 V Maximum RMS Voltage Vrms 105 V Maximum DC blocking Voltage Vdc 150 V Maximum Average Forward Rectified Current If(av) 10 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 160 A Vf 0.88 V Ta =25°C Ta =110°C Ir 50 1.0 μA mA (Note 1) Rth(jc) 4.5 °C/W Tj Tstg -65 to +175 °C Maximum Forward Voltage at 5A Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Operating Junction and Storage Temperature Ramge Note: 1.Thermal Resistance from Junction to Case Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB10150FCT Rev.A1 www.gulfsemi.com