DC/DC Converters TES 6 Series, 6/7,5 Watt pending Features ◆ Surface Mount DIL-Package ◆ Wide 2:1 Input Range ◆ 21 Standard Models ◆ High Efficiency up to 85% ◆ I/O-Isolation 1’500 VDC ◆ Indefinite Short-Circuit Protection ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ High Accuracy of Pin Co-Planarity ◆ High Reliability, MTBF >1 Mio. h ◆ 3 Year Product Warranty The TES 6 converter series is intended for all applications where PCB’s are assembled on an automated SMD production line. The light weight DIL-package allows easy handling by pick and place machines. High efficiency allows an operating temperature range of -40°C to +71°C without derating. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC, level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 6-1210 3.3 VDC 1200 mA 77 % TES 6-1211 5 VDC 1200 mA 81 % TES 6-1212 12 VDC 625 mA 83 % 15 VDC 500 mA 83 % TES 6-1221 ± 5 VDC ± 500 mA 81 % TES 6-1222 ± 12 VDC ± 312 mA 83 % TES 6-1223 ± 15 VDC ± 250 mA 83 % TES 6-2410 3.3 VDC 1200 mA 79 % TES 6-2411 5 VDC 1200 mA 83 % TES 6-1213 9 – 18 VDC TES 6-2412 12 VDC 625 mA 85 % 15 VDC 500 mA 85 % TES 6-2421 ± 5 VDC ± 500 mA 83 % TES 6-2422 ± 12 VDC ± 312 mA 85 % TES 6-2423 ± 15 VDC ± 250 mA 85 % TES 6-4810 3.3 VDC 1200 mA 79 % TES 6-4811 5 VDC 1200 mA 83 % TES 6-4812 12 VDC 625 mA 85 % 15 VDC 500 mA 85 % ± 5 VDC ± 500 mA 83 % TES 6-2413 TES 6-4813 TES 6-4821 18 – 36 VDC 36 – 75 VDC TES 6-4822 ± 12 VDC ± 312 mA 85 % TES 6-4823 ± 15 VDC ± 250 mA 85 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TES 6 Series 6/7,5 Watt Input Specifications Input current no load 12 Vin models 24 Vin models 48 Vin models Input current full load 12 Vin models with 3.3/±5 Vout 12 Vin models with other outputs 24 Vin models with 3.3/±5 Vout 24 Vin models with other outputs 48 Vin models with 3.3/±5 Vout 48 Vin models with other outputs 20 mA 5 mA 3 mA 430 mA / 510 mA typ. 600 mA typ. 210 mA / 250 mA typ. 600 mA typ. 100 mA / 130 mA typ. 150 mA typ. Start-up voltage / under voltage shut down 12 Vin models 6 VDC / 8 VDC typ. 24 Vin models 12 VDC / 16 VDC typ. 48 Vin models 24 VDC / 32 VDC typ. Surge voltage (1 sec. max.) 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, class A Output Specifications Voltage set accuracy Regulation ±1% – – – – – Input variation Vin min. to Vin max. Load variation 10 – 100 % single output models dual output models balanced load dual output models unbalanced load 0.3 % max. 1 % max. 1 % max. 2.5 % max. Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation >120 % of Iout max., constant current Short circuit protection fold back, automatic recovery Capacitive load 3.3 VDC output models 680 µF max. 5 VDC single output models 1’500 µF max. other models 100 µF max. General Specifications Temperature ranges – Operating – Case temperature – Storage – 40°C ... + 71 °C (no derating) + 105°C max. – 40°C ... + 125 °C Derating 4 %/K above 71 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 380 pF typ. Isolation resistance Input/Output (500 VDC) > 1‘000 MOhm Switching frequency 300 kHz Safety standards IEC / EN 60950, UL 60950 Safety approvals UL / cUL, CB-report pending All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 6 Series 6/7,5 Watt Physical Specifications Case material non conductive black plastic Potting material Epoxy (UL 94V-0 rated) Weight 14 g (0.55 oz) Soldering temperature Peak temp. 230°C (10 sec max.) 185°C for 90 sec max. Convection reflow solder process is recommended Outline Dimensions mm (inches) 33.4 ±0.25 S Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No con. No con. 10 No con. Common (0.89) 11 –Vout –Vout 25.6 12 –Vout –Vout 13 +Vout –Vout 14 +Vout +Vout 15 +Vout +Vout (0.016) 20.6 ±0.25 (0.81 ±0.01) 22.6 24 13 (1.01) Detail A 1. (0 .0 6) 5 Top View 2.7 ±0.25 15.24 2.54 1.5 (0.11 ±0.01) (0.6) (0.1) (0.06) Connecting Pin Patterns: (0.006) 12 0.15 0.15 1 Pin-Out Detail A Seating Plane (0.40 ±0.01) 0.4 10.2 ±0.25 (1.31 ±0.01) 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 24 –Vin (GND) –Vin (GND) 27.94 (1.1) 2.7 2.54 2.54 15.24 (0.6) 2.54 2.54 2.54 (0.1) (0.1) (0.1) 3.0 (0.12) 27.0 (1.063) (0.11) (0.1) (0.1) 1.9 (0.059) () = inches Tolerances: ±0.1mm (0.04 Inches) Specifications can be changed without notice Rev. 03/05 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com Page 3 of 3