DC/DC Converter TEN 5 Series 6 Watt Features Wide 2:1 Input Range Full SMD-Design High Power Density High Efficiency up to 86% Regulated Outputs I/O-isolation 1’500 VDC Indefinite Short-Circuit Protection Input Filter meets EN 55022, Class A and FCC, Level A without external Components Shielded Metal Case with insulated Baseplate 24-pin DIP with Industry Standard Pinout High Reliability, MTBF >1 Mio. h 2 Year Product Warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of -40°C to +75°C without derating. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC, level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 9 – 18 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1200 1000 500 400 ± 500 ± 250 ± 200 mA mA mA mA mA mA mA 77 81 84 84 81 84 84 % % % % % % % 18 – 36 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1200 1000 500 400 ± 500 ± 250 ± 200 mA mA mA mA mA mA mA 79 83 86 86 83 86 86 % % % % % % % 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1200 1000 500 400 ± 500 ± 250 ± 200 mA mA mA mA mA mA mA 79 83 86 86 83 86 86 % % % % % % % Page 1 DC/DC Converter TEN 5 Series 6 Watt Input Specifications Input current no load /full load 12 Vin models 24 Vin models 48 Vin models 20 mA / 590 mA typ. 5 mA / 290 mA typ. 3 mA / 145 mA typ. Start-up voltage / under voltage shut down 12 Vin models 24 Vin models 48 Vin models 8.5 VDC / 8 16.5 VDC / 16 32.5 VDC / 32 Surge voltage (1 sec. max.) 12 Vin models 24 Vin models 48 Vin models 25 V max. 50 V max. 100 V max. VDC VDC VDC Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1% Regulation ± 0.3 % max. – Input variation Vin min. to Vin max. – Load variation 10 – 100 % – single output models – dual output models balanced load – dual output models unbalanced load ± 1 % max. ± 1 % max. ± 3 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation >110 % of Iout max., constant current Short circuit protection hiccup mode, indefinite (automatic recovery) Capacitive load 6800 µF max. 1000 µF max. – single output models – dual output models General Specifications Temperature ranges – Operating – Case temperature – Storage – 40 °C ... + 75 °C (no derating) + 95 °C max. – 40 °C ... + 125 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 380 pF typ Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 1950 , IEC 60950, EN 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approval UL /cUL File E188913 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 5 Series 6 Watt Physical Specifications Case material Steel chrome-nickel plated Baseplate Epoxy Potting material Silicon rubber TSE (flammability to UL 94V-0) Weight 14 g (0.55 oz) Soldering temperature max. 260 °C / 10 sec. 2.54 (0.1) (0.2) 5.08 15.24 (0.6) Insulated Baseplate 0.5 2.4 ±0.5 (0.02) (0.1 ±0.02) 5 10 ±0.5 (0.2) (0.4 ±0.02) Pin diameter ø 0.5 ±0.05 (0.02 Tolerances ±0.5 (0.02) Pin-Out 2 3 Bottom view (0.18 ±0.02) 23 22 22.86 (0.9) 32 ±0.5 (1.25 ±0.02) 4.54 ±0.5 Outline Dimensions mm (inches) 16 9 14 11 15.24 (0.6) Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 20 ±0.5 (0.8 ±0.02) ±0.002) Specifications can be changed without notice Rev. 06/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 3