T-1 3/4 ( φ 5mm) PACKAGE HIGH POWER AlInGaP LED LAMPs Description MVL-5A4SO Package Dimensions The MVL-5A4SO utilizes the latest absorbing 5.05 (.200) substrate Aluminum Indium Gallium Phosphide Unit: mm ( inches ) (AlInGaP) LED technology. This LED material 5.47 (.215) has outstanding light output efficiency over 7.62 (.300) a wide range of drive current. The package is T-1 3/4 (φ5mm) water clear standard type. 5.90 (.230) 1.00 (.040) SEE NOTE 2 Features l Ultra - brightness l Low power consumption l TTL compatible l Reliable 25.40 MIN. (1.000) 0.50 TYP. (.020) 1.00MIN. (.040) 2.54TYP. 2.54TYP. (.100) (.1) SEE NOTE 3 A C Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Maximum Rating Unit Power Dissipation 125 mW Peak Forward Current(1/10 Duty Cycle100µs pulse width) 100 mA Continuous Forward Current 50 mA Reverse Voltage 5 V Operating Temperature Range -40oC to + 100oC Storage Temperature Range -40oC to + 100oC Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260oC Unity Opto Technology Co., Ltd. 01/09/2002 MVL-5A4SO @ TA=25oC Optical-Electrical Characteristics Parameter Test Conditions Symbol Min . Typ . Max . Unit . Luminous Intensity IF=20mA IV 1500 3000 - mcd Forward Voltage IF=20mA VF - 2.0 2.6 V Reverse Current VR=5V IR - - 100 µA Dominant Wavelength IF=20mA λd - 605 - nm Spectral Line Half Width IF=20mA ∆λ - 19 - nm Viewing Angle IF=20mA 2θ1/2 - 8 - deg. Typical Optical-Electrical Characteristic Curves Relative Luminous Intensity 1 0.5 0 540 565 590 615 640 665 Wavelength (nm) FIG.1 SPECTRAL DISTRIBUTION 60 Forward Current IF (mA) Forward Current IF (mA) 50 40 30 20 10 0 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.2 0 Relative Luminous Intensity 5.0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 Forward Current VF (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 20 40 60 80 100 Ambient Temperature TA (oC) FIG.3 FORWARD CURRENT VS. AMBIENT TEMPERATURE Forward Voltage VF (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE Relative Luminous Intensity 50 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 FIG.5 RADIATION DIAGRAM Unity Opto Technology Co., Ltd. 01/09/2002