ELLIPSE (4.7 X 5.7) High Performance AllnGaP LED Lamps Description MVL-663TUYLK-S Package Dimensions The MVL-663TUYLK-S, utilizes the latest transparent Unit: mm ( inches ) φ4.70 (.191) substrate Aluminum Indium Gallium Phosphide 4.7 (.191) (AllnGaP) LED technology. This LED material 7.70 (.312) has outstanding light output efficiency over 5.7 (.231) a wide range of drive current. The package is ellipse transparent yellow color plastic type. SEE NOTE 2 3.70 (.150) 1.5 0 (.060) Features l Ultra - brightness l Low power consumption l TTL compatible l Coating 25.40 MIN. (1.000) 0.50 TYP. (.020) 1.00MIN. (.040) 2.54TYP. (.100) A SEE NOTE 3 C Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Symbol Maximum Rating Unit Power Dissipation Pad 125 mW Peak Forward Current(1/10 Duty Cycle 100µs pulse width) Ipf 100 mA Continuous Forward Current Iaf 50 mA Reverse Voltage VR 5 Operating Temperature Range Topr -40 C to +100 C Storage Temperature Range Tstg -40oC to +101oC o Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260 V o o C Unity Opto Technology Co., Ltd. 12/16/2000 MVL-663TUYLK-S Optical-Electrical Characteristics @ TA=25oC Parameter Test Conditions Symbol Min. Typ . Max. Unit Luminous Intensity IF=20mA IV - 400 - mcd Forward Voltage IF=20mA VF - 2.3 2.7 V Reverse Current VR=5V IR - - 100 µA Peak/Dominant Wavelength IF=20mA λp/λd - 592/590 - nm Spectral Radiation Bandwidth IF=20mA ∆λ - 20 - nm Viewing Angle IF=20mA 2θ1/2 - 30/70 - deg. Relative Luminous Intensity Typical Optical-Electrical Characteristic Curves 1 0.5 0 500 550 600 650 700 50 Forward Current I F (mA) Forward Current I F (mA) Wavelength (nm) FIG.1 SPECTRAL DISTRIBUTION 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 50 40 30 20 10 0 3.2 0 30 60 90 o 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 Forward Current IF (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Relative Luminous Intensity 0° 10° 5.0 120 Ambient Temperature TA ( C) FIG.3 FORWARD CURRENT VS. AMBIENT TEMPERATURE Forward Voltage VF (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE Relative Luminous Intensity 60 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 FIG.5 RADIATION DIAGRAM Unity Opto Technology Co., Ltd. 12/16/2000