ELLIPSE (4.7 X 5.7) High Performance AllnGaP LED Lamps MVL-663TUOLK-S Description Package Dimensions The MVL-663TUOLK-S , utilizes the latest transparent Unit: mm ( inches ) φ4.70 (.191) substrate Aluminum Indium Gallium Phosphide (AllnGaP) LED technology. This LED material 4.7 (.191) has outstanding light output efficiency over a wide range of drive current. 7.70 (.312) The package is ellipse transparent red color plastic type. 5.7 (.231) Applications l l l l l Full color displays & moving message signs Solid state incandescent replacement bulbs High ambient panel indicators Color printers & scanners Medical & Analytical instruments SEE NOTE 2 3.70 (.150) 1.5 0 (.060) 25.40 MIN. (1.000) 0.50 TYP. (.020) Features l l l l l Ultra - brightness Low power consumption TTL compatible Reliable Stopper 1.00MIN. (.040) 2.54TYP. (.100) SEE NOTE 3 A C Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Symbol Maximum Rating Unit Power Dissipation Pad 125 mW Peak Forward Current(1/10 Duty Cycle100µs pulse width) Ipf 100 mA Continuous Forward Current Iaf 50 mA Reverse Voltage VR 5 o V o Operating Temperature Range Topr -40 C to +100 C Storage Temperature Range Tstg -40oC to +100oC Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260oC Unity Opto Technology Co., Ltd. 12/16/2000 MVL-663TUOLK-S Optical-Electrical Characteristics @ TA=25oC Parameter Test Conditions Symbol Min . Typ . Max . Unit . Luminous Intensity IF=20mA IV - 1000 - mcd Forward Voltage IF=20mA VF - 2.3 2.7 V Reverse Current VR=5V IR - - 100 µA Peak /Dominant Wavelength IF=20mA λp/λd - 630/625 - nm Spectral Line Half Width Viewing Angle IF=20mA ∆λ 2θ1/2 - 24 - nm - 30/70 - deg. IF=20mA Relative Luminous Intensity Typical Optical-Electrical Characteristic Curves 1 0.5 0 550 575 600 625 650 675 700 50 Forward Current IF (mA) Forward Current IF (mA) Wavelength (nm) FIG.1 SPECTRAL DISTRIBUTION 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 4.0 3.0 2.0 1.0 0.0 40 60 80 40 30 20 10 0 0 100 Forward Current IF (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 30 60 90 120 Ambient Temperature TA (oC) FIG.3 FORWARD CURRENT VS. AMBIENT TEMPERATURE Relative Luminous Intensity Relative Luminous Intensity 5.0 20 50 3.2 Forward Voltage VF (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE 0 60 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 FIG.5 RADIATION DIAGRAM Unity Opto Technology Co., Ltd. 12/16/2000