T-1 3/4 (5mm) SOLID STATE LAMPS L-1503Ix HIGH EFFICIENCY RED L-1503EC HIGH EFFICIENCY RED L-1503Yx YELLOW L-1503Gx GREEN Features Description ! HIGH INTENSITY. The High Efficiency Red source color devices are made POWER CONSUMPTION. with Gallium Arsenide Phosphide on Gallium Phosphide ! LOW ! VERSATILE ! T-1 MOUNTING ON P.C. BOARD OR PANEL. 3/4 DIAMETER FLANGELESS PACKAGE . ! RELIABLE The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. AND RUGGED. ! DIFFUSED, Orange Light Emitting Diode. TRANSPARENT AND WATER CLEAR TYPE. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0014 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: SEP/30/2001 DRAWN: X.M.Zhou PAGE: 1 OF 5 Selection Guide Par t No . Dic e Iv (m c d ) @ 10 m A L en s Ty p e L-1503ID V i ew i n g An g l e Min . Ty p . 2θ1/2 RED DIFFUSED 8 30 60 ° RED TRANSPARENT 30 80 30 ° L-1503EC WATER CLEAR 30 80 30 ° L-1503GD GREEN DIFFUSED 5 20 60 ° L-1503IT HIGH EFFICIENCY RED (GaAsP/GaP) L-1503GT GREEN TRANSPARENT 20 60 30 ° L-1503GC GREEN (GaP) WATER CLEAR 20 60 30 ° L-1503YD YELLOW DIFFUSED 5 20 60 ° L-1503YT YELLOW (GaAsP/GaP) L-1503YC YELLOW TRANSPARENT 20 40 30 ° WATER CLEAR 20 40 30 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength High Efficiency Red Green Yellow λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 627 565 590 nm IF=20mA High Efficiency Red Green Yellow 625 568 588 nm IF=20mA High Efficiency Red Spectral Line Halfwidth Green Yellow 45 30 35 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance High Efficiency Red Green Yellow 15 15 20 VF Forward Voltage High Efficiency Red Green Yellow 2.0 2.2 2.1 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C Par am et er H i g h E f f i c i e n c y R ed Gr een Yello w Un it s Power dissipation 105 105 105 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 160 140 140 mA 5 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: KDA0014 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: SEP/30/2001 DRAWN: X.M.Zhou PAGE: 2 OF 5 High Efficiency Red L-1503ID,L-1503IT SPEC NO: KDA0014 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: SEP/30/2001 DRAWN: X.M.Zhou PAGE: 3 OF 5 High Efficiency Red L-1503EC Green L-1503GD,L-1503GC,L-1503GT SPEC NO: KDA0014 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: SEP/30/2001 DRAWN: X.M.Zhou PAGE: 4 OF 5 Yellow L-1503YD,L-1503YC,L-1503YT SPEC NO: KDA0014 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: SEP/30/2001 DRAWN: X.M.Zhou PAGE: 5 OF 5