T-1 3/4 (5mm) SOLID STATE LAMPS L1513IT HIGH EFFICIENCY RED L1513EC HIGH EFFICIENCY RED L1513Yx YELLOW L1513Gx GREEN Features Description !IMPROVED INTENSITY. The High Efficiency Red source color devices are made !LOW POWER CONSUMPTION. with Gallium Arsenide Phosphide on Gallium Phosphide ! VERSATILE MOUNTING ON P.C. BOARD OR PANEL. Orange Light Emitting Diode. ! T-1 3/4 DIAMETER PACKAGE, TAPERED TYPE. The Green source color devices are made with Gallium !RELIABLE AND RUGGED. Phosphide Green Light Emitting Diode. !TRANSPARENT AND WATER CLEAR TYPE. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0707 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: NOV/11/2001 DRAWN: R.X.Jin PAGE: 1 OF 5 Selection Guide P ar t N o . Dic e L1513IT HIGH EFFICIENCY RED (GaAsP/GaP) L1513EC L1513GT GREEN (GaP) L1513GC L1513YT YELLOW (GaAsP/GaP) L1513YC Iv (m c d ) @ 10 m A L en s Ty p e V i ew i n g An g l e Min . Ty p . 2θ1/2 RED TRANSPARENT 50 80 20 ° WATER CLEAR 50 80 20 ° GREEN TRANSPARENT 20 50 20 ° WATER CLEAR 20 60 20 ° YELLOW TRANSPARENT 20 40 20 ° WATER CLEAR 20 40 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength High Efficiency Red Green Yellow λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 627 565 590 nm IF=20mA High Efficiency Red Green Yellow 625 568 588 nm IF=20mA High Efficiency Red Spectral Line Halfwidth Green Yellow 45 30 35 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance High Efficiency Red Green Yellow 15 15 20 VF Forward Voltage High Efficiency Red Green Yellow 2.0 2.2 2.1 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C Par am et er H i g h E f f i c i e n c y R ed Gr een Yello w Un it s Power dissipation 105 105 105 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 160 140 140 mA 5 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: CDA0707 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: NOV/11/2001 DRAWN: R.X.Jin PAGE: 2 OF 5 High Efficiency Red SPEC NO: CDA0707 APPROVED : J. Lu L1513IT REV NO: V.1 CHECKED : DATE: NOV/11/2001 DRAWN: R.X.Jin PAGE: 3 OF 5 High Efficiency Red Green L1513EC L1513GC,L1513GT SPEC NO: CDA0707 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: NOV/11/2001 DRAWN: R.X.Jin PAGE: 4 OF 5 Yellow L1513YC,L1513YT SPEC NO: CDA0707 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: NOV/11/2001 DRAWN: R.X.Jin PAGE: 5 OF 5